Amerock London Series 10-1/16 in (256 mm) Center to Center Polished Nickel/Black Bronze Pull, -BP36664PNBBR

Amerock London Pull For Modern Cabinet Runs

Amerock London pull 10-1/16 center to center gives a long, continuous grip for doors and drawers using a 10-1/16 inch center-to-center layout, so it fits wider cabinet fronts without crowding the panel edges. The London collection design uses faceted forms and clean geometric patterns, which creates a sophisticated modern statement on face frames and full-overlay cabinetry. Crisp lines combine with an assembled, split finish design in polished nickel and black bronze, so the pull reads well against both light and dark fronts. The pull length of 12-1/2 inches spreads the visual weight across wider fronts, helping long drawers look proportional. A projection of 1-9/16 inches provides finger clearance from the cabinet face, supporting comfortable use on thicker fronts. Zinc construction gives a solid metal base for the dual-finish look while keeping the piece manageable in multi-unit layouts.

Key Amerock London Collection Pull Details

• The London collection design with faceted forms and clean geometric patterns creates a sophisticated modern statement, giving contemporary cabinet lines a consistent visual language from door to drawer.
• Crisp lines with an assembled, split finish in polished nickel and black bronze add contrast on the same pull, so mixed-finish hardware runs can transition cleanly across different cabinet colors.
• A 10-1/16 inch center-to-center measurement aligns with long drawer and door layouts, allowing consistent handle spacing across banks of cabinets and tall pantry fronts.
• The 12-1/2 inch overall length visually anchors wider drawers, helping large faces look finished without overcrowding narrow fronts in the same run.
• A 1-9/16 inch projection from the face gives room for a full hand grip, supporting everyday use on heavy drawers and tall doors without fingers pinching against the front.
• A zinc material body provides a metal substrate for the polished nickel and black bronze finishes, supporting uniform appearance across multiple pulls in a project.

Mounting Dimensions And Pull Fit On Cabinets

The 10-1/16 inch center-to-center dimension sets the drilling pattern for this Amerock London collection pull, so installer layouts can be repeated accurately across drawer banks. A 12-1/2 inch overall length allows the handle to sit comfortably on wide fronts while still clearing rail details at each end. The 13/16 inch width defines how much stile or drawer face the pull covers, which helps when aligning with existing reveals or panel lines. A 1-9/16 inch projection keeps knuckles away from the door or drawer face, reducing contact marks in high-use areas. Base dimensions of 9/16 by 3/8 inch keep the footpads compact, helping the pull land fully on narrow rails or slimmer drawer fronts.

Using The BP36664PNBBR Pull In Cabinet Projects

Where This Polished Nickel Black Bronze Pull Fits

The BP36664PNBBR part uses a polished nickel and black bronze split finish, so the pull works on cabinets that combine light facings with darker details or trim. The London collection style with faceted forms and clean geometric patterns suits straight-line cabinet programs where squared doors and flat drawer fronts are already in place. A 10-1/16 inch center-to-center layout fits long drawer widths and tall doors, giving a continuous grasp point that matches the scale of pantry units and wide base cabinets. With a 12-1/2 inch overall length, the pull spans more of the front, which helps visually tie together multi-drawer stacks. The 13/16 inch width keeps the profile slim on face frames, avoiding interference with adjacent doors in tight reveals. Zinc construction supports repeated use in everyday cabinet environments where metal hardware is standard.

Details That Support Consistent Layout And Results

The fixed 10-1/16 inch center-to-center spacing on this Amerock London pull simplifies template use, because the same drilling distance repeats across doors and drawers in a run. A projection of 1-9/16 inches gives enough clearance for different hand sizes, so the grip stays comfortable on heavier drawers without contacting the front surface. The compact 9/16 by 3/8 inch base dimensions allow the feet to sit on narrower rails, which is useful when aligning with shaker-style stiles or slim drawer trims. A 13/16 inch width balances the long overall length, so the handle looks proportioned rather than bulky, helping maintain straight visual lines along the cabinetry. The combined polished nickel and black bronze finish on a zinc body creates a defined break line between the two tones, giving installers a repeatable orientation point when lining up multiple pulls at the same height.

Common Questions About The Amerock London Pull

Select This London Pull For Matching Runs

The Amerock London pull 10-1/16 center to center offers a long 12-1/2 inch handle with a slim 13/16 inch width, so it scales well from wide drawers to tall doors in the same project. Polished nickel and black bronze split finish on a zinc body delivers the London collection faceted forms and clean geometric patterns across each cabinet front. For projects where consistent drilling, defined finger clearance, and a modern two-tone look are priorities, this BP36664PNBBR pull aligns with those layout and design needs.