Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock London pull 96mm center to center provides a 3-3/4 inch mounting span that lines up with standard cabinet drilling, which matters when swapping pulls on existing doors and drawers without redrilling or patching work.
The London collection design uses faceted forms and clean geometric patterns, so the pull brings a defined modern look that matches straight-lined casework and helps create consistent visual rhythm across a run of fronts.
A split finish of satin nickel and polished chrome on this pull creates contrast on the same handle, which lets it bridge nearby brushed and bright metal surfaces on hinges, faucets, or appliances within the same installation zone.
The pull length of 6-5/16 inches gives hand clearance beyond the 3-3/4 inch center-to-center, which supports comfortable grasping on wider drawers while still fitting on typical cabinet face frames.
A projection of 1-9/16 inches sets the pull far enough off the front for fingers to wrap behind, which helps operators get a firm grip on heavier loaded drawers in kitchens, baths, or shop storage.
The 13/16 inch width of the pull body creates a substantial contact surface, which spreads hand pressure during frequent use and can reduce localized wear marks on high-traffic cabinets.
Base dimensions of 9/16 by 3/8 inch at each mounting foot define the footprint against the surface, which matters when covering previous pull outlines or working within narrow rail spaces.
The pull is made from zinc, which provides a stable base material for the satin nickel and polished chrome finish combination so the visual effect stays tied to the underlying casting geometry.
The 3-3/4 inch center-to-center dimension on this Amerock London pull sets the hole spacing for installation, which fits cabinets drilled on the 96 mm standard and keeps alignment consistent on multi-door and multi-drawer banks.
An overall length of 6-5/16 inches means the handle extends past the mounting points, which positions the gripping area more centrally on drawer fronts and helps distribute pulling force across the hardware and front.
The 1-9/16 inch projection determines how far the handle stands off the face, which influences hand access around adjacent doors and can reduce knuckle contact with the cabinet surface during operation.
Base dimensions at each foot of 9/16 by 3/8 inch define the contact area on the door or drawer face, which matters when layouts must sit fully on narrow rails or cover marks left by previous pulls.
The Amerock London series 3-3/4 inch center-to-center pull sits in the decorative hardware and moldings, handles and pulls category, which aligns it with typical cabinet, vanity, and furniture front applications that rely on through-bored mounting.
The satin nickel and polished chrome finish pairing prepares this pull for projects where mixed-metal elements appear in the same room, which is common when appliances, faucets, and hinges present different metal sheens around the cabinetry.
A length of 6-5/16 inches relative to the 3-3/4 inch drilling makes the pull well suited to standard base and wall cabinet doors, which often benefit from a handle that visually spans more of the stile without overcrowding the rail intersections.
The 13/16 inch width and 1-9/16 inch projection keep the pull profile compact yet functional, which can be important on doors that open near adjacent panels, tall pantry units, or side walls where clearance is limited.
Positioning this zinc pull on doors or drawers places its faceted forms and clean geometric patterns at eye and hand level, which supports a consistent modern theme from one cabinet bank to the next across the installation.
The specified 96 mm center-to-center drilling dimension for this Amerock London cabinet pull helps installers repeat the same measurement on jigs, which reduces layout variation and supports straight hardware lines across long cabinet runs.
Knowing the 6-5/16 inch overall length before boring holes lets planners map handle locations relative to door edges, which protects against handles overhanging into neighboring fronts or clashing with adjacent hardware.
The 1-9/16 inch projection gives a fixed stand-off value for clearance checks, which matters when doors open beside deep face frames or when drawers pass close to surrounding panels and trim pieces.
Width of 13/16 inch, combined with base dimensions of 9/16 by 3/8 inch, defines the exact bearing area on the surface, which helps determine whether the pull will cover prior imprint lines or finish transitions from previous hardware.
The zinc material used for this Amerock Corporation pull provides a defined substrate for the satin nickel and polished chrome finish combination, which keeps the visual effect tied to the precise casting outline and helps each pull match others in the London collection.
The London collection styling with faceted forms and geometric patterns creates repeated angled surfaces, which can catch light consistently along a bank of cabinets and reinforce alignment accuracy during installation.
The Amerock London pull uses a 3-3/4 inch (96 mm) center-to-center dimension, which matches standard cabinet boring layouts for straightforward alignment on doors and drawers.
The Amerock BP36648G1026 pull has an overall length of 6-5/16 inches, which provides extra handle span beyond the mounting holes for better proportions on typical cabinet fronts.
This London collection cabinet pull projects 1-9/16 inches from the surface, which creates hand space behind the handle for comfortable gripping on doors and drawers.
This Amerock London series handle uses a satin nickel and polished chrome finish combination, which lets it coordinate with both brushed and bright metal elements in the same project.
The Amerock London satin nickel polished chrome pull is made from zinc, which serves as the base material for the detailed casting and applied finishes.
Each mounting base on this Amerock London cabinet pull measures 9/16 by 3/8 inch, which defines the contact footprint on the cabinet surface.
The Amerock London cabinet pull in satin nickel and polished chrome pairs a 3-3/4 inch (96 mm) center-to-center layout with a 6-5/16 inch length, which supports consistent spacing and proportions across doors and drawers in coordinated cabinet projects.
The 1-9/16 inch projection, 13/16 inch width, and defined base dimensions give clear sizing for planning runs, which helps align this zinc London collection pull with modern cabinetry through Wurth Baer Supply.
Sold In: 1 Each
