Amerock London Series 5-1/16 in (128 mm) Center to Center Satin Nickel/Polished Chrome Pull, -BP36649G1026

Amerock London Cabinet Pull For Modern Cabinets

Amerock London cabinet pull uses faceted forms and clean geometric patterns to create a modern statement on cabinet faces, which suits installers needing a contemporary hardware look. The London collection design uses crisp lines, giving doors and drawers a sharp, defined appearance that aligns well across a run of fronts. A split satin nickel and polished chrome finish delivers contrasting surfaces, so the pull reads well against both light and dark cabinet finishes. The pull is made from zinc, providing a solid metal feel while keeping the weight suitable for standard cabinet construction. Overall length of 7-1/2 in gives enough hand space for firm grasp, which helps on larger doors. A 1-9/16 in projection sets the grip off the face so fingers clear the panel during use. Width of 13/16 in presents a visible, proportional front profile on typical cabinet rails and stiles.

Key London Collection Pull Details For Projects

• The 5-1/16 in center-to-center dimension matches a common drilling pattern, which helps installers reuse existing 128 mm hole spacing on replacement jobs or lay out consistent new runs on cabinet doors and drawers.
• The satin nickel and polished chrome split finish provides two coordinated metal tones on one pull, which allows the hardware to bridge mixed appliance, faucet, and hinge finishes in the same kitchen or bath installation.
• The zinc material construction delivers a metal pull body, which gives cabinets a substantial feel at the touch point while keeping the hardware workable for standard residential cabinet fronts.
• The 7-1/2 in overall length spans more of the drawer or door face, which visually anchors wider fronts and supports uniform alignment when repeating the pull across banks of cabinets.
• The 1-9/16 in projection holds the gripping surface away from the cabinet, which provides knuckle clearance in daily use and reduces contact between finished doors and the back of the pull.

Installation Dimensions For Accurate Pull Layout

This Amerock London pull uses a 5-1/16 in (128 mm) center-to-center mounting dimension, which lets installers align drilling across multiple fronts using standard jigs and templates. Base dimensions of 9/16 in by 3/8 in at each end give a compact footprint, helping the feet land cleanly on typical rail widths. The 7-1/2 in overall length means the pull extends past the mounting points, so it visually centers across drawers while still tying into the fixed screw locations. A projection of 1-9/16 in positions the gripping bar out from the face, which keeps fingers off the door surface during operation. The 13/16 in width creates a firm contact surface for the hand, supporting repeatable grip when opening heavier cabinet drawers or doors.

Using This London Pull In Real Installations

Where The Amerock London Cabinet Pull Fits

The Amerock London Series 5-1/16 in center-to-center pull is designed for cabinet doors and drawers that match the 128 mm drilling pattern, which aligns with many modern kitchen and bath layouts. Its faceted forms and clean geometric patterns suit contemporary and transitional cabinet styles, giving a defined hardware line across fronts. The satin nickel and polished chrome finish combination works on installations that feature both warm and cool metal tones, tying together fixtures and decorative hardware in the same room. With a 7-1/2 in overall length, the pull scales well on medium and wider drawers, helping hardware stay proportional to the front size. The zinc construction supports use on typical residential cabinet materials, keeping the pull appropriate for standard wood or composite fronts.

Details That Support Consistent, Repeatable Results

The 5-1/16 in (128 mm) center-to-center dimension gives installers a precise drilling reference, which reduces layout variation when using jigs over multiple cabinets. Base dimensions of 9/16 in by 3/8 in keep the mounting footprint tight, so the feet seat fully on narrow rails without overhanging edges. A 1-9/16 in projection sets the pull at a functional distance from the face, helping maintain knuckle clearance while protecting finished surfaces from frequent hand contact. The 13/16 in width offers a stable grip area, which improves control when opening heavier drawer boxes. The satin nickel and polished chrome split finish creates clear visual edges along the pull, assisting in aligning multiple pulls in a straight visual line across upper and lower cabinets.

Common Questions About The Amerock London Pull

Select The Right London Pull For Your Project

The Amerock London Series 5-1/16 in center-to-center pull pairs a 7-1/2 in overall length with a 1-9/16 in projection, giving cabinets a defined, usable grip zone. The zinc construction and 13/16 in width provide a solid handhold on doors and drawers. With its satin nickel and polished chrome split finish and precise 128 mm drilling dimension, this Amerock London cabinet pull aligns visual design with straightforward layout on new or replacement cabinet installations.