Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock London knob uses faceted forms and clean geometric patterns to create a modern pull point across doors or drawer fronts, so cabinets gain a consistent contemporary look from one end of the run to the other. The London collection design combines crisp lines with an assembled, split finish layout, so each knob adds a defined visual break that works well on flat-panel or slab fronts. A length of 2-1/2 in (64 mm) spans more of the hand, giving a comfortable grip area when opening wider drawers or heavier cabinet fronts. The knob width of 13/16 in (21 mm) keeps the footprint compact, which helps when laying out tight banks of drawers or narrow face frames. Projection of 1-9/16 in provides finger clearance away from the face, helping reduce contact marks on finished surfaces during daily use.
The Amerock London knob length of 2-1/2 in (64 mm) gives a clear center section to grab, which helps on heavier cabinet doors where a positive pull is important. At 13/16 in (21 mm) width, the knob stays narrow enough to fit comfortably on smaller drawer fronts without crowding neighboring hardware locations. Projection of 1-9/16 in sets the gripping point out from the door or drawer face, leaving room for fingers so the hand pulls straight instead of scraping along finished wood or laminate. Base dimensions of 9/16 in by 3/8 in define a compact contact area, which matters when aligning multiple knobs to existing layout lines or when staying inside narrow rail widths. These fixed dimensions support repeatable drilling patterns across multiple cabinets.
The Amerock London knob from the London collection uses a black chrome / satin nickel split finish, which suits cabinet runs that already feature mixed metal tones on decorative hardware. Its faceted forms and clean geometric patterns suit modern and contemporary cabinet programs that rely on straight lines and flat surfaces. The zinc construction provides a solid decorative hardware body, which supports everyday operation on frequently used kitchen, bath, or built-in cabinet doors and drawers. A 2-1/2 in (64 mm) length offers a larger hand contact area than small round knobs, which helps on wide drawers and tall pantry doors where users expect a firmer pull point. The compact base dimensions of 9/16 in by 3/8 in keep the footprint contained on narrow stiles, which helps maintain proportional spacing on smaller fronts.
The 2-1/2 in (64 mm) length on this Amerock London knob establishes a predictable visual span from end to end, which helps installers line up knobs evenly along horizontal or vertical axes across a bank of drawers. The 13/16 in (21 mm) width concentrates the mass through the center, so spacing between adjacent knobs on double doors remains comfortable without visually overpowering the face. A 1-9/16 in projection defines how far the knob stands off the cabinet face, which helps layout personnel maintain consistent reveal depth when combining knobs with pulls or other decorative hardware on the same elevation. Base dimensions of 9/16 in by 3/8 in set a small contact patch, which supports layout close to panel edges where rail height is limited. The black chrome / satin nickel finish pairing ties knobs together across multiple elevations, helping designers carry a unified London collection look from upper wall cabinets down through base and tall units.
The Amerock London knob measures 2-1/2 in (64 mm) in length, 13/16 in (21 mm) in width, and projects 1-9/16 in from the cabinet face, setting clear layout expectations.
The black chrome / satin nickel finish creates a split, two-tone appearance that pairs with mixed metal schemes and helps the knob stand out against cabinet surfaces.
The Amerock London knob is made from zinc, giving a solid decorative hardware body suitable for frequent door and drawer operation in typical cabinet installations.
The 9/16 in by 3/8 in base keeps the contact area compact, allowing placement on narrow rails or stiles while staying within visible trim boundaries.
The London collection design uses faceted forms and clean geometric patterns, giving modern cabinets a structured, contemporary look that aligns with straight-edged fronts.
The 1-9/16 in projection sets the gripping point away from the door or drawer face, providing finger clearance and reducing contact with finished surfaces during operation.
The Amerock London knob in black chrome / satin nickel combines a 2-1/2 in (64 mm) length, 13/16 in (21 mm) width, and 1-9/16 in projection, giving clear layout dimensions for repeat drilling patterns. Its zinc construction, compact base of 9/16 in by 3/8 in, and London collection geometry support consistent, modern lines across cabinet banks. For projects that call for mixed metal decorative hardware with defined edges, this Amerock London knob helps align form, finish, and function from one cabinet opening to the next.
Sold In: 1 Each
