Amerock London Series 3-3/4 in (96 mm) Center to Center Black Chrome/Polished Chrome Pull, -BP36648BCR26

Amerock London Cabinet Pull 96mm For Modern Jobs

Amerock London cabinet pull 96mm center to center is a zinc handle from the Amerock London collection designed for doors or drawers needing a 3-3/4 in (96 mm) hole spread. This pull uses a Black Chrome / Polished Chrome split finish, which creates a strong visual contrast that suits projects calling for a sophisticated modern statement. Its faceted forms and clean geometric patterns give fronts a crisp, structured look, which helps tie together straight-line cabinet layouts. The pull measures 6-5/16 in in overall length, so it comfortably spans common drawer fronts while keeping a balanced proportion. A projection of 1-9/16 in spaces fingers away from the surface, which supports a solid grip when opening heavier cabinet doors. The 13/16 in width presents a substantial face, which reads well across a bank of cabinets.

Key London Collection Pull Details For Projects

• The London collection design with faceted forms and geometric patterns creates a defined, modern visual line, which helps installers achieve a consistent contemporary style across multiple cabinet runs.
• The Black Chrome / Polished Chrome finish uses a split, assembled look that introduces contrast at the handhold, giving designers an easy way to echo mixed-finish faucets or appliances on the same elevation.
• Zinc material construction provides a solid-feeling pull, which supports repeated daily use on frequently opened doors and drawers in kitchen, bath, or shop cabinetry.
• The 6-5/16 in overall length spans typical drawer widths, which gives hardware spacing that looks intentional and aligned on standard cabinet layouts.
• The 1-9/16 in projection sets the grip away from the face, which helps hands clear applied moldings or thicker door profiles during operation.
• The 13/16 in width and 9/16 in by 3/8 in base dimensions create a stable footprint, which helps distribute load against the cabinet surface during pulling.

Mounting And Fit Dimensions For This Pull

This Amerock London series pull uses a 3-3/4 in (96 mm) center-to-center dimension, which matches drilling patterns laid out on that common metric spacing. A #8-32 x 1 in screw size interface is specified, which fits standard cabinet hardware drilling and threading. The pull length of 6-5/16 in positions the mounting posts inward from the ends, which gives enough room at the tips for visual balance on face frames or full-overlay fronts. A 1-9/16 in projection brings the gripping surface to a practical distance off the cabinet plane, supporting access when doors sit flush with surrounding panels. The 13/16 in width and 9/16 in by 3/8 in base dimensions define the contact area at each mounting point, which helps align the pull accurately over layout marks.

Using The Amerock London Pull On Cabinets

Where This Amerock London Cabinet Pull Works

The Amerock London series 3-3/4 in (96 mm) center to center pull fits cabinet and drawer fronts drilled on the 96 mm pattern, which is widely used on kitchen and bath casework. Its Black Chrome / Polished Chrome split finish pairs well with other chrome elements, giving continuity across hinges, faucets, or appliance trims. The 6-5/16 in overall length suits medium-width drawers and doors, which helps maintain proportion on standard base or wall cabinets. With a projection of 1-9/16 in, this pull provides clearance that supports comfortable gripping on full-overlay doors where the front surface aligns closely with the frame. The zinc material supports installation in residential or light commercial cabinetry using standard knob and pull locations.

Details That Support Consistent Alignment Results

The defined 3-3/4 in (96 mm) center-to-center dimension on the Amerock BP36648BCR26 pull allows repeatable drilling using jigs built around that size, which simplifies running multiple doors or drawers in sequence. A specified #8-32 x 1 in screw size gives a known thread and length target, which supports cleaner hardware preparation on the back of the door or drawer fronts. The 9/16 in by 3/8 in base dimensions provide a clear footprint to line up with layout marks, which helps keep hardware straight along rails and stiles. The faceted forms and clean geometric patterns carry straight edges along the pull, giving visual reference lines that expose any misalignment quickly so adjustments can be made before final tightening. The Black Chrome / Polished Chrome finish defines a precise transition line across the split design, which helps keep hardware rows looking even when installed across an entire project.

Common Questions About This London Series Pull

Select This Pull For 96mm London Layouts

The Amerock London series 3-3/4 in (96 mm) center to center Black Chrome / Polished Chrome pull BP36648BCR26 combines zinc construction, a defined 96 mm drilling pattern, and a 6-5/16 in overall length to support modern cabinet runs. Its faceted forms, clean geometric patterns, and split Black Chrome / Polished Chrome finish bring a coordinated look to doors and drawers sharing this hardware line. For projects calling for consistent 96 mm spacing and a contemporary London collection profile, this pull offers clear, documented dimensions for planning cabinet and drawer front layouts.