Amerock London Series 8 in (203 mm) Center to Center Satin Nickel/Black Chrome Pull, -BP36663G10BCR
Description
Amerock London Pull 8 Inch Center To Center
Amerock London pull 8 inch center to center is a zinc cabinet handle that uses an 8 inch center-to-center mounting layout to span wider drawer or door fronts cleanly, giving a balanced grip position on modern cabinet runs. The pull belongs to the London collection, which uses faceted forms and clean geometric patterns to create a sophisticated modern statement on face frames or slab doors. A satin nickel and black chrome split finish runs across the handle, so installers get a two-tone look that reads crisp against both light and dark surfaces. The pull body is made from zinc, which provides a solid feel while supporting repeated daily use on high-touch doors and drawers. The handle is produced by Amerock Corporation under part number BP36663G10BCR, providing a consistent reference when matching pieces across a job or planning future additions in the same line.
Cabinet Pull Details That Support Clean Layouts
The 8 inch center-to-center dimension sets predictable mounting hole spacing, helping runs of doors and drawers line up visually across a bank of cabinets.
A total length of 10-7/16 inches extends the pull beyond the mounting points, giving more hand clearance along the handle for comfortable gripping on wider faces.
A projection of 1-9/16 inches brings the pull out from the door surface, offering finger room between the hardware and cabinet face for smoother opening action.
The 13/16 inch width across the pull presents a defined band of metal, creating a noticeable visual line while still fitting comfortably on standard cabinet rail heights.
Base dimensions of 9/16 inch by 3/8 inch at each mounting point keep the footprint compact, which supports tight placement near panel details or narrow frame sections.
Mounting Dimensions For Straightforward Cabinet Fit
The 8 inch center-to-center measurement fixes the hole spacing for this pull, so drilling layouts on new work or aligning with existing holes follows a consistent pattern across multiple fronts. With the overall length at 10-7/16 inches, the pull overhangs the mounting holes on both sides, allowing it to visually center on panels while maintaining the structural support at the screw locations. A projection of 1-9/16 inches moves the gripping surface away from the door edge, which provides finger clearance when adjacent fronts are close together. At 13/16 inch width, the bar of the pull sits solidly on the face without crowding decorative profiles. Each base at 9/16 by 3/8 inch seats the pull at the contact points, helping define where it meets the cabinet surface during installation.
Using The Amerock London Pull On Projects
Where The London Collection Cabinet Pull Works
The London collection design on this pull uses faceted forms and clean geometric patterns, so it fits projects calling for a modern, structured look on cabinet faces. Satin nickel paired with black chrome creates a split finish appearance, letting the same pull tie together mixed metal themes on doors and drawers in one room. The 8 inch center-to-center span supports use on wider cabinet drawers where longer hardware feels proportional to the front width. With an overall 10-7/16 inch length, the pull can stand out as a feature piece across banks of base cabinets or tall pantry doors. The 1-9/16 inch projection means the pull stands off the surface enough for a solid grip on thicker drawer fronts. Zinc construction supports use in busy areas where hardware sees frequent opening and closing.
Details That Help Achieve Consistent Installs
The 8 inch center-to-center layout on this Amerock London cabinet pull keeps hole drilling consistent from piece to piece, helping installers maintain straight visual lines along upper and lower runs. Length at 10-7/16 inches gives a known edge-to-hole distance on both sides, simplifying measurements when aligning multiple pulls at the same setback from door edges. The 1-9/16 inch projection defines a clear standoff, so the relationship between handle and cabinet face looks uniform whenever the pull is repeated across a wall of cabinets. At 13/16 inch width, the hardware covers the immediate area around each mounting point while still leaving panel detail visible, which helps layouts that need hardware to respect existing grooves or profiles. Base dimensions of 9/16 by 3/8 inch give a compact contact area, supporting precise positioning against layout marks. The defined satin nickel and black chrome split finish stays consistent from pull to pull, helping large installations read as one coordinated London collection design.
Common Questions About This Amerock London Pull
What are the key dimensions of the BP36663G10BCR pull?
The Amerock BP36663G10BCR pull has 8 inch center-to-center spacing, 10-7/16 inch overall length, 1-9/16 inch projection, 13/16 inch width, and base dimensions of 9/16 by 3/8 inch for layout planning.
How does the 8 inch center-to-center spacing help installations?
The 8 inch center-to-center spacing on this London collection cabinet pull standardizes drilling locations, supporting straight, repeatable hardware alignment across multiple doors and drawers.
What finish does this London collection cabinet handle use?
This London collection cabinet handle uses a satin nickel and black chrome split finish, creating a two-tone look that coordinates with different metal tones on surrounding fixtures.
What material is the Amerock London cabinet pull made from?
The Amerock London cabinet pull is made from zinc, giving the handle a solid metal construction suited to regular door and drawer operation.
How does the projection affect day-to-day cabinet use?
A projection of 1-9/16 inches holds the pull away from the cabinet surface, providing finger clearance that supports comfortable gripping during daily opening cycles.
What does the BP36663G10BCR part number represent?
The BP36663G10BCR part number identifies this specific Amerock London pull with satin nickel and black chrome finish, helping match the exact model across ordering and project documentation.
Selecting This Pull For Cabinet Projects
The Amerock London Series 8 inch center-to-center satin nickel and black chrome pull combines a defined modern profile with dimensions suited to wider cabinet fronts. Using the BP36663G10BCR part number ties orders and layout notes to one precise London collection design, supporting consistent results across current work and future additions.
