Amerock London Pull 96mm Center To Center Use

Amerock London pull 96mm center to center gives cabinets a modern geometric look using crisp, faceted forms, so it creates a clean visual line across doors and drawers. The London collection design combines faceted forms with clean geometric patterns, so runs of cabinets keep a consistent, contemporary style. Its assembled, split finish design pairs Black Chrome with Golden Champagne, so the pull delivers a dramatic contrast where darker fronts meet warmer details. A center-to-center size of 3-3/4 in (96 mm) sets predictable drilling points, so layout and drilling stay repeatable from one front to the next. The pull length of 6-5/16 in spans more of the drawer face, so it gives a larger gripping area without overwhelming standard cabinet widths.

Key London Pull Details That Support Projects

• The Black Chrome / Golden Champagne finish combines two tones on one pull, so it helps transition between dark cabinet fronts and lighter hinges or faucets in the same run.
• The zinc material construction creates a solid decorative pull body, so the handle feels substantial in hand on frequently used cabinet and drawer fronts.
• The 6-5/16 in overall length stretches visually across the face, so a pair of these pulls can line up neatly on wider drawers for a balanced layout.
• The 13/16 in width offers a defined gripping surface, so fingers can find the edge consistently when operating base or wall cabinets.
• The 1-9/16 in projection brings the pull away from the door face, so knuckles have clearance behind the handle when opening heavier fronts.
• The base dimensions of 9/16 in by 3/8 in locate each foot precisely, so installers can mark and drill for the feet to sit flat against the cabinet surface.

Installation Dimensions And Mounting Details

The 3-3/4 in (96 mm) center-to-center dimension aligns the mounting holes, so jigs and templates set for this spacing can be used across multiple doors and drawers. A projection of 1-9/16 in holds the gripping bar off the surface, so even thicker door fronts leave room behind the pull for fingers. The base size of 9/16 in by 3/8 in defines the footprint at each end, so the pull seats neatly on standard face frame rails or slab fronts without overhanging edges. The specified screw size of #8-32 x 1 in describes the threaded fastener interface, so the handle fastens through typical cabinet door and drawer thicknesses using that machine screw thread.

Where This Amerock London Pull Works Best

Modern London Collection Style For Cabinets

The London collection design with faceted forms and clean geometric patterns suits modern cabinet lines, so it ties together straight-edged fronts and flat-panel doors. Its assembled, split finish layout creates a strong visual band in Black Chrome and Golden Champagne, so the pull stands out against both painted and stained wood. A length of 6-5/16 in gives the handle enough span for use on kitchen base cabinets, so repeated pulls across a run maintain proportion on larger drawers. The 13/16 in width keeps the profile slim while still visible, so it reads as a refined linear detail instead of a bulky bar. With a center-to-center measurement of 3-3/4 in (96 mm), the pull fits layouts based on this common spacing, so it can line up across doors and drawers in the same room.

Dimensions That Support Repeatable Cabinet Layouts

The 3-3/4 in (96 mm) center-to-center spacing sets a fixed hole pattern, so installers can rely on the same drilling setup from one panel to the next, reducing layout variation. The base dimensions of 9/16 in by 3/8 in define compact feet at each end, so they sit fully on narrow rails or stile faces without overlapping profile edges. A projection of 1-9/16 in controls how far the bar stands off the surface, so pull lines stay parallel to the door faces and align cleanly with nearby hardware. The overall length of 6-5/16 in allows pairs of pulls to be positioned symmetrically on wide drawers, so hardware centers can be set at predictable distances from drawer edges. The zinc material forms the body of the pull, so thread engagement with the #8-32 x 1 in screw size remains consistent at each mounting point.

Common Questions About Amerock London Cabinet Pull

Selecting This Amerock London Pull For Projects

The Amerock London Series 3-3/4 in (96 mm) center-to-center Black Chrome / Golden Champagne pull BP36648BCRBBZ pairs defined geometry with a split finish, so it serves both design and function on cabinets. With zinc construction, a 6-5/16 in length, 13/16 in width, and 1-9/16 in projection, the pull provides consistent hand clearance and grip on doors and drawers. The fixed 96 mm center-to-center spacing and compact 9/16 in by 3/8 in bases support accurate drilling and clean alignment across a full run. Use these verified dimensions and finish details to match this Amerock pull to cabinets where a modern, two-tone linear handle is needed.