Amerock London Series 8 in (203 mm) Center to Center Black Chrome/Golden Champagne Pull, -BP36663BCRBBZ
Description
Amerock London 8 In Pull For Modern Cabinets
Amerock London 8 in pull uses a faceted form with clean geometric patterns, so it creates a modern, structured look across doors and drawers. The assembled split finish in Black Chrome and Golden Champagne adds a two-tone visual that stands out clearly on both light and dark cabinet finishes. The 8 in (203 mm) center-to-center drilling lines up with common wider cabinet layouts, which helps keep handle spacing consistent across large doors or wide drawers. A total length of 10-7/16 in gives generous grip area, making it easier to open heavier fronts. The 1-9/16 in projection brings the pull comfortably off the face of the cabinet, providing finger clearance while still staying tight enough for a sleek line. A width of 13/16 in gives a substantial bar profile that feels solid in hand during everyday use.
Design And Dimensional Details That Support Use
The 8 in center-to-center dimension sets precise hole spacing, which supports straight, repeatable drilling across multiple fronts on a run of cabinets.
The overall 10-7/16 in length spreads the visual mass of the pull, which helps balance wider drawers or tall doors in larger cabinet installations.
The 1-9/16 in projection defines how far the pull stands off the surface, which provides consistent finger clearance while maintaining a close-to-door profile.
The 13/16 in width gives a defined gripping surface, which improves control when opening heavier or loaded drawers.
The 9/16 in by 3/8 in base dimensions set the footprint at each mounting point, which concentrates contact where the pull meets the door or drawer face.
The zinc material construction forms a solid, unified body, which supports a stable feel when the pull is fastened to cabinetry.
Installation Dimensions For Cabinet Handle Layout
The 8 in (203 mm) center-to-center measurement fixes the distance between mounting holes, which guides drilling templates and jig settings during installation. The stated overall length of 10-7/16 in helps with layout around rail widths, allowing the pull to be centered visually while maintaining consistent margins from panel edges. A projection of 1-9/16 in defines standoff from the cabinet surface, which matters when aligning pulls near adjacent walls or appliances. The 9/16 in by 3/8 in base dimensions clarify the contact points on the door or drawer, which is useful when positioning the pull away from profiled edges or narrow framing. The #8-32 screw size and 1 in length describe the thread and depth interface at each mounting point, which ties directly into the door thickness and material the pull is fastened to.
Where This Amerock London Pull Works Best
Applying The Black Chrome And Champagne Finish
The Black Chrome and Golden Champagne split finish creates a strong contrast, which can highlight the pull as a design feature on both painted and stained cabinet fronts. This two-tone appearance comes from the assembled design, which allows distinct color sections to read clearly from a distance. On a bank of drawers, the consistent 10-7/16 in length repeats a horizontal line, which supports a uniform, modern look. On tall doors, the faceted forms and clean geometric patterns add visual structure, which helps tie together mixed cabinet sizes in a kitchen or bath. The zinc material provides a solid base for the decorative finish, which supports a consistent surface appearance across multiple pulls installed in the same space.
Dimensions That Support Repeatable Cabinet Layouts
The 8 in center-to-center size suits wider fronts, which helps align this pull with larger drawer boxes and full-height doors in contemporary layouts. Using the same 8 in spacing across a room keeps drilling patterns consistent, which speeds layout when working with jigs or templates. The 1-9/16 in projection gives a predictable offset from the face, which helps avoid hand contact with door edges when opening. The 13/16 in width forms a comfortable gripping bar, which supports repeated use in busy kitchen or commercial cabinetry. The 9/16 in by 3/8 in base dimensions define a compact footprint, which allows the pull to sit on narrow rails or stile faces without overlapping into panel details. The Amerock London collection styling keeps the faceted and geometric details consistent, which supports visual continuity when this pull is used throughout multiple rooms or cabinet runs.
Common Questions About This Amerock London Pull
What are the key dimensions of the Amerock London 8 in pull?
The Amerock London Series pull has an 8 in center-to-center, 10-7/16 in overall length, 1-9/16 in projection, and 13/16 in width, which together set layout, clearance, and grip feel.
How does the 8 in center-to-center size affect installation?
The 8 in center-to-center size fixes hole spacing for drilling, which simplifies setting up jigs and keeps handle alignment consistent on wide drawers and doors.
What finish does the Amerock BP36663BCRBBZ pull use?
The Amerock BP36663BCRBBZ pull uses a Black Chrome and Golden Champagne split finish, which creates a two-tone look that stands out on both light and dark cabinet faces.
What material is the London collection 8 inch pull made from?
The London collection 8 inch pull is made from zinc, which provides a solid body for everyday cabinet and drawer operation.
How far does this cabinet pull project from the door surface?
This cabinet pull projects 1-9/16 in from the mounting surface, which provides finger clearance while keeping a streamlined profile against the cabinet.
What screw size does this Amerock London cabinet pull use?
This Amerock London cabinet pull uses #8-32 x 1 in screws, which defines the thread and depth needed to secure it to cabinet doors or drawers.
Selecting This Pull For Your Next Cabinet Run
The Amerock London Series 8 in (203 mm) center-to-center pull combines a faceted, geometric profile with a Black Chrome and Golden Champagne split finish, so it supports modern cabinet projects needing a defined design statement. The 8 in drilling, 10-7/16 in overall length, and 1-9/16 in projection give clear layout and clearance dimensions, which streamline planning across doors and drawers. The zinc construction and precisely stated base dimensions provide a clear interface at each mounting point, which helps coordinate this pull within broader hardware schedules. For projects where a consistent, modern pull is needed across multiple cabinet runs, this model offers defined measurements and a distinct visual that can be repeated room to room.
