Amerock London Cabinet Pull 160mm For Modern Cabinets

Amerock London cabinet pull 160mm is a zinc handle from the London collection, so every pull carries the same faceted forms and clean geometric patterns for a consistent modern look across doors and drawers. The assembled, split finish in polished nickel and black chrome puts a bright surface beside a darker accent, which helps the pull read clearly against both light and dark fronts on installed runs. The center-to-center dimension of 6-5/16 in (160 mm) sets the drilling pattern, giving a predictable layout when you line up multiple pulls on wide drawers. Overall length of 8-3/4 in stretches the visual line further than the drill span, which helps tie together larger cabinet faces without crowding the panel field.

Design And Size Details That Support Clean Layouts

• The zinc material establishes a solid metal body, which gives the pull a firm feel at the hand grip during everyday cabinet use.
• The polished nickel and black chrome finish creates the split-finish effect, which helps the faceted form read as a deliberate design feature on face frames or frameless fronts.
• The faceted forms and clean geometric patterns define the pull profile, which keeps lines straight and predictable when aligning hardware across a full kitchen or bank of casework.
• The 6-5/16 in (160 mm) center-to-center dimension fixes the hole spacing, which simplifies layout when matching existing 160 mm boring patterns in replacement work.
• The 8-3/4 in overall length puts more metal across the front than the drill span, which visually balances wider drawer fronts and tall doors in built-ins or kitchen runs.
• The 13/16 in width sets the front face size, which keeps the pull substantial to the eye without pushing too close to adjacent edges on standard rail widths.

Installation Dimensions For Amerock London Cabinet Pull

The 6-5/16 in center-to-center drilling size defines where to bore mounting holes, so the pull drops onto a standard 160 mm layout commonly used on wider drawers and doors. The projection of 1-9/16 in controls how far the pull stands off the cabinet face, leaving useful finger clearance behind the bar while keeping the hardware tight to the front to limit snag points. Base dimensions of 9/16 in by 3/8 in determine the footprint at each mounting point, which keeps contact concentrated and clean on the surface while fitting comfortably on typical rail heights and narrow stile faces.

Using The London Collection Pull In Real Projects

Where The 8-3/4 In London Pull Works Best

The London collection design pairs faceted forms with clean geometric patterns, which suits straight-line cabinet layouts in contemporary kitchens, baths, and built-ins. The 8-3/4 in length gives the handle enough span to sit proportionally on wide drawer fronts, so one pull can visually carry a full drawer width without feeling undersized. On tall doors, the same length provides a clear vertical grab area, which helps keep hand placement predictable from cabinet to cabinet. The split polished nickel and black chrome finish delivers contrast within the pull itself, so it reads as a focal detail even on flat, minimal door styles. In banks of drawers, the repeated 6-5/16 in center-to-center pattern helps keep all hardware aligned, supporting straight sight lines across the installation.

Why These Pull Dimensions Support Repeatable Results

The 6-5/16 in (160 mm) center-to-center value matches a common metric drilling standard, which makes it straightforward to repeat the same hole pattern across multiple fronts using jigs built around 160 mm spacing. The 1-9/16 in projection creates a consistent stand-off distance from the door or drawer face, so finger clearance feels the same from unit to unit and reduces variability in day-to-day use. Width at 13/16 in sets a defined front face, which keeps the pull comfortable to grasp while leaving room around it on typical frame or slab designs. Base dimensions of 9/16 in by 3/8 in keep the contact area compact, which helps the pull sit neatly on narrow rails without overhanging edges and supports tight visual alignment along the run.

Common Questions About The Amerock London Pull BP36650PNBCR

Select This London Pull For Defined Modern Lines

The London collection pull with 6-5/16 in (160 mm) center-to-center spacing, 8-3/4 in overall length, and 1-9/16 in projection brings a consistent modern profile to cabinet runs. At Wurth Baer Supply, this Amerock BP36650PNBCR model pairs zinc construction with a polished nickel and black chrome finish, so you can match faceted, geometric hardware across doors and drawers. Use these confirmed dimensions and finish details to align this pull with your drilling layout and design intent on your next cabinet project.