Amerock London 8 in pull is a zinc handle from the London collection that uses faceted forms and clean geometric patterns to create a sophisticated modern statement, so it suits contemporary cabinet layouts where consistent style matters across doors and drawers. The polished nickel and black bronze split finish uses an assembled, two-tone design that delivers a dramatic visual break on the cabinet face, which helps highlight door lines and drawer fronts in a run of casework. The 8 in (203 mm) center-to-center mounting dimension aligns with common cabinet drilling patterns, so this pull works for standard wide drawers or doors that need a longer grip length. The overall length of 10-7/16 in provides extended hand clearance across the front, which helps on larger fronts where a longer pull supports more balanced operation and appearance.
The 8 in (203 mm) center-to-center mounting dimension specifies the distance between fastener holes on the Amerock London cabinet handle, which guides drilling layouts when positioning this pull on doors and drawers. The overall length of 10-7/16 in indicates how far the handle extends across the front, which helps when spacing pulls relative to panel edges or neighboring hardware on wider cabinetry. A projection of 1-9/16 in sets the stand-off from the cabinet surface, which affects how fingers engage the pull in tight galley runs or on overlay doors. The 9/16 in by 3/8 in base dimensions at each end show the bearing area against the door or drawer front, which matters when aligning the bases with narrow frames or flush slab fronts for a clean, repeatable installation line.
The London collection cabinet pull is part of the Amerock London series, which is defined by faceted forms and clean geometric patterns, so it integrates into casework that favors straight, architectural lines. The polished nickel and black bronze finish pairing creates a split-finish design, which can bridge mixed metal palettes in kitchens or built-ins that use both lighter and darker fixtures. With an 8 in center-to-center dimension, this pull suits wider cabinet drawers and taller doors that benefit from a longer gripping span, giving openings a proportion that tracks the overall cabinet height or drawer width. The 13/16 in width provides a defined front band on the face, which visually anchors the pull on slab doors or narrow rails without overwhelming the panel. A projection of 1-9/16 in offers clearance from the cabinet surface, which supports comfortable hand access on full-overlay fronts or deeper profiles often found in modern cabinetry. The zinc construction keeps the pull in a decorative hardware category appropriate for residential and commercial woodworking environments where coordinated finishes across multiple openings are important.
The Amerock London 8 in pull uses a clearly defined 8 in (203 mm) center-to-center spacing, which standardizes hole drilling across a project so multiple doors and drawers line up with the same reference dimension. Its overall length of 10-7/16 in establishes a predictable edge-to-edge footprint, which simplifies setting reveals between adjacent pulls on banks of drawers or tall pantry doors. The 9/16 in by 3/8 in base dimensions give a compact but repeatable bearing surface, which helps when aligning the bases to narrow rails or stile edges for a uniform sightline. The polished nickel and black bronze split finish is created as an assembled design, which delivers the same two-tone look from pull to pull so long cabinet runs read as one coordinated system. The 13/16 in width and 1-9/16 in projection work together to define the hand contact area and clearance, which influences user feel when opening heavier fronts and helps maintain a consistent experience throughout the installation. The zinc material provides a single-substrate pull body, which supports uniform machining of these dimensions so every BP36663PNBBR unit follows the same layout assumptions during cabinet work.
The Amerock London 8 in pull has a center-to-center dimension of 8 in (203 mm), which sets the hole spacing used when laying out doors and drawers for this handle.
The BP36663PNBBR pull has an overall length of 10-7/16 in, which defines how much of the cabinet front it spans and helps with placement on wider drawers or doors.
The London collection pull is made from zinc, which provides a solid decorative hardware body suitable for repeated use on cabinet doors and drawers.
The pull projects 1-9/16 in from the cabinet surface, which sets finger clearance behind the handle during everyday opening and closing.
The handle has a width of 13/16 in, which determines the visible band across the cabinet face and influences the visual weight of the hardware.
Each base on this London series pull measures 9/16 in by 3/8 in, which defines the contact footprint used when aligning it on rails or slab fronts.
The Amerock London cabinet handle pairs its faceted, geometric London collection design with an 8 in center-to-center layout, which serves projects needing a longer pull on doors and drawers. Its polished nickel and black bronze split finish, defined overall length, projection, width, and base measurements give clear reference points when planning consistent hardware lines across casework. For cabinetry that targets a modern, structured look using known dimensions, this BP36663PNBBR pull offers a defined set of measurements to build into your next hardware run.
Sold In: 1 Each
