Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock London cabinet pull 10-1/16 in describes a decorative handle from the London collection that installs on doors or drawers using a 10-1/16 in center-to-center layout, giving installers a clear drilling pattern for consistent alignment across multiple fronts. The pull uses zinc material, which provides a solid-feeling grip for frequent opening and closing on busy cabinet runs. Its Satin Nickel / Black Chrome split finish creates a modern contrast that visually breaks up flat door faces, adding definition without changing cabinet construction. With a length of 12-1/2 in, the pull spans more of the door or drawer width, helping visually balance wider faces on base or pantry cabinets. A projection of 1-9/16 in sets the hand clearance off the surface, allowing fingers to wrap behind the pull for comfortable operation in everyday use. The 13/16 in width presents enough surface area for a confident grasp in kitchens, baths, or built-ins.
The 10-1/16 in center-to-center drilling dimension on this London pull gives a fixed hole spacing for the mounting locations, which supports precise layout on new cabinet faces or when aligning with an existing 10-1/16 in pattern. The projection of 1-9/16 in sets the standoff from the door or drawer face, which affects how far the hand sits from the surface and can help when working near adjacent walls or tall appliance panels. With a 13/16 in width, the handle presents a stable gripping bar that does not feel too narrow under load. The length of 12-1/2 in means the pull reaches beyond the hole spacing at both ends, which can visually center hardware on larger drawer fronts and help installers maintain consistent reveals.
The London collection pull uses faceted forms and clean geometric patterns, which supports modern and transitional cabinet designs where straight lines and crisp edges are important. Its Satin Nickel / Black Chrome finish combination helps the pull bridge between brushed metal fixtures and darker appliance or accent finishes, keeping hardware coordinated across the room. The 10-1/16 in center-to-center size places this piece in a larger pull category that suits wide drawers, tall pantry doors, and long vanity fronts that benefit from an extended grip area. Because the length is 12-1/2 in, the pull visually anchors bigger fronts, avoiding a small-hardware look on substantial drawer boxes. Zinc material construction gives the handle a substantial hand feel during repeated openings, which is useful on frequently used storage like kitchen base cabinets, bathroom vanities, or office built-ins.
The fixed 10-1/16 in center-to-center specification on the Amerock London Series pull 256 mm allows installers to build drill jigs or templates once and reuse them, which speeds layout when running banks of drawers. The base dimensions of 9/16 in by 3/8 in define a compact footprint, helping plan coverage where existing finish work is tight around the mounting zones. A projection of 1-9/16 in positions the grip away from the face, which can reduce knuckle contact with doors and drawer fronts during use. The 13/16 in width offers enough bar surface to spread hand pressure along the pull, supporting comfortable operation on heavy drawers that see frequent loading. The combined Satin Nickel / Black Chrome finish presents a defined edge between tones, which helps installers visually confirm straight alignment against cabinet rails and stiles as hardware is set. Together, these measured details support consistent results from the first cabinet run to the last.
The BP36664G10BCR London pull has a 10-1/16 in center-to-center dimension, so installers can drill two mounting holes at that spacing for accurate fit on doors or drawers.
The Amerock London cabinet pull measures 12-1/2 in in overall length, allowing it to span wider drawer or door fronts for a more balanced visual appearance.
This London collection pull is made from zinc with a Satin Nickel / Black Chrome finish, combining solid-feeling construction with a two-tone modern appearance on cabinet fronts.
The Amerock London pull has a 1-9/16 in projection, setting the grip off the cabinet surface so fingers can wrap behind the handle comfortably.
The London pull is 13/16 in wide, giving a bar thickness that feels substantial in the hand while staying slim enough for modern cabinet designs.
The BP36664G10BCR pull has base dimensions of 9/16 in by 3/8 in at each mounting point, which helps plan coverage around the contact area on the cabinet surface.
The Amerock London cabinet pull 10-1/16 in center-to-center pairs a 12-1/2 in length with a 1-9/16 in projection and 13/16 in width, giving clear dimensions for layout on wider doors and drawers. Its zinc construction and Satin Nickel / Black Chrome finish from the London collection bring a modern, geometric look suited to contemporary cabinet lines. With defined base dimensions and a consistent drilling pattern, this handle supports efficient installation across full projects when sourced through Wurth Baer Supply.
Sold In: 1 Each
