Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Grass 6610 left-hand rear mounting bracket provides the back-end support a drawer slide needs in a face-frame cabinet — where the cabinet side sits behind the face frame and the slide's rear end has nothing to fasten to without a dedicated socket. This bracket is the white, left-hand version, sold in a pack of 500 for production cabinet shops ordering at volume.
Face-frame cabinets leave the slide's rear end hanging in air unless a rear mounting socket bridges the gap between the cabinet back and the slide. This bracket clips or screws into position at the back of the cabinet, giving the 6610 slide a secure rear anchor point. Without it, the slide tips under load and the drawer runs poorly or not at all. Specify this bracket any time a Grass 6610 series slide goes into a face-frame opening on the left-hand side.
The white finish is a practical choice in production runs where the cabinet interior is white melamine or painted white — the bracket recedes rather than drawing the eye. Plastic construction keeps weight low and eliminates any risk of marring the cabinet side or drawer box during installation and cycling.
Cabinet shops running face-frame lines through white interiors will use this bracket on every left-side drawer position. A pack of 500 suits a shop that builds face-frame cabinets in volume and wants to avoid mid-run reorders. Designers and contractors specifying Grass 6610 slides into face-frame work should confirm this bracket is on the hardware list before the job ships — it is a required component, not an optional upgrade, and a missing rear bracket is one of the most common reasons a slide installation has to be revisited.
This bracket is designed for the Grass 6610 series. Rear mounting sockets are series-specific — do not assume it fits other Grass slide families without confirming compatibility against the specific series specification.
Yes. This is the left-hand member only. Each drawer requires one left-hand and one right-hand rear mounting bracket. Order the matching right-hand bracket separately to complete every drawer position.
In a frameless cabinet, the slide screws directly to the flat interior side panel, which runs the full depth of the cabinet. In a face-frame cabinet, the side panel is set back from the frame, leaving the rear of the slide without a mounting surface at the correct depth. The rear bracket provides that missing anchor point at the back of the cabinet.
This pack contains 500 left-hand brackets. To outfit 500 drawer positions on the left side, you also need 500 right-hand brackets, ordered separately. Plan your quantities by drawer count, not by pair count.
A properly supported rear mount is what turns a good slide into a drawer that runs straight and holds up over years of use — get the bracket count right before the build starts and avoid the return trip.
Sold In: 500 Each
