Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Como furniture leg chrome describes a 2 inch diameter x 6 inch high Como furniture leg that supports cabinets, work surfaces, and tables where a clean metal support is needed. The leg belongs to Peter Meier's Como Series, so it matches that premium line when additional or replacement supports are required on existing installations that already use this series. The leg is part of the equipment and furniture legs class, so it is suited to structural support rather than decorative trim alone on installations that carry real loads. The leg has a weight capacity per leg of 660 lbs, which allows a single leg to handle heavy cabinets or worktops in demanding woodworking or shop environments. All cabinet legs in this line are made of steel, giving a rigid support structure that helps limit flex under rated load. The leg uses a chrome finish, so it visually matches chrome hardware on many cabinets and tables.
This 6 inch high Como furniture leg uses a 3 inch square mounting plate, so the top connection spreads load over a broader cabinet or work surface area for stable support. The plate layout lets installers position the leg under cabinets or tables where a square footprint matches corner or intermediate reinforcement points. The leg also has a 1-1/8 inch adjustable black plastic foot, giving fine vertical adjustment so installers can level cabinets or work surfaces when the floor is uneven. The adjustable foot threads under the main tube height, so the compacted height range remains tied to the 6 inch Como leg dimension while still offering that leveling range. As a Camar Como leg offered in multiple heights in the same series, the 6 inch option fits projects that require a moderate support height while staying consistent with other Como legs on the job.
The 2 inch diameter x 6 inch high Como furniture leg from Camar fits work surfaces and tables that need a sturdy vertical support in the 6 inch range. The 3 inch square mounting plate design suits cabinet runs, workbenches, and equipment stands where a broad attachment helps distribute weight into the substrate. Because the Como Series is a premium line of steel cabinet legs, this 6 inch leg aligns with other Peter Meier Como heights such as 4 inch, 8 inch, and 10 inch for mixed-height applications that keep the same visual profile. The 660 lbs per leg capacity means a small number of legs can carry substantial loads, which benefits longer work surfaces with concentrated equipment weight. In table or cabinet layouts using multiple legs, the square plate gives predictable geometry when spacing supports along rails or under corners.
The 1-1/8 inch adjustable black plastic foot on this Como furniture leg lets installers dial in final height after the leg and mounting plate are fastened, which helps achieve level cabinets and work surfaces even when the subfloor varies. That adjustability range helps reduce rework because slight height changes can be handled at the foot rather than re-drilling mounting locations. The steel construction across all cabinet legs in this Como Series supplies a rigid column under load, which maintains alignment between connected cabinets or table frames when they are loaded near the 660 lbs per leg capacity. The chrome finish on the steel leg continues that functional benefit by resisting visual wear in exposed locations, which is useful under open tables or contemporary cabinets where the leg remains visible. As a Como leg identified by manufacturer part number 552-15-C1, this specific model can be matched precisely during ordering when an existing installation already uses that part across multiple supports.
This Como furniture leg is 2 inches in diameter and 6 inches high, so it sets a medium support height while presenting a substantial tube profile under cabinets or work surfaces.
This 6 inch high Como leg has a weight capacity per leg of 660 lbs, allowing each support to carry heavy cabinets, work surfaces, or tables within that rating.
The 552-15-C1 Como leg uses a 3 inch square mounting plate, which spreads the load over a wider area on the cabinet or work surface for stable attachment.
The adjustable black plastic foot provides 1-1/8 inches of adjustment, so installers can fine-tune height to level cabinets or work surfaces on uneven floors after mounting.
This Camar Como leg is made of steel, giving it the strength needed for its 660 lbs per leg capacity in furniture and equipment support applications.
The Como Series offers cabinet legs in 4, 6, 8, and 10 inch compacted heights, so this 6 inch model serves mid-height applications alongside shorter or taller Como legs.
This 2 inch diameter x 6 inch high Como furniture leg from Camar pairs a steel body, chrome finish, and 660 lbs per leg rating for demanding cabinetry and table work. The 3 inch square mounting plate and 1-1/8 inch adjustable black plastic foot support efficient leveling and stable attachment under real project loads. For installations built around Peter Meier's Como Series, this 552-15-C1 model keeps visual and dimensional consistency with other heights in the line while delivering the same structural performance across work surfaces and cabinets.
Sold In: 1 Each
