Como furniture leg brushed steel defines a sturdy support leg from Camar that is part of Peter Meier's Como Series of steel cabinet legs, giving cabinetmakers and fabricators a consistent way to support work surfaces and furniture pieces. The leg stands 4 inches high at compacted height and is designed with a 2 inch diameter steel tube, which provides a broad load-bearing footprint to stabilize cabinets under heavy use. A 1-1/8 inch adjustable black plastic foot at the base allows small height changes, which helps installers level cabinets on slightly uneven floors without reworking surrounding components. All cabinet legs in this series are made of steel, so they contribute rigid vertical support where wood or lighter material might flex. The Como Series is described as a premium line, which positions this leg as a solution when projects call for higher weight capacity and consistent fit across multiple heights.
This Como furniture leg uses a 3 inch square mounting plate, which establishes a defined interface between the leg and the cabinet bottom, helping align multiple legs to consistent reference points. The 3 inch square plate gives a generous footprint for fasteners, helping spread the load into the cabinet base material and supporting the stated 660 lbs weight capacity per leg. The 1-1/8 inch adjustable black plastic foot threads in or out at the base, letting installers take up minor floor variations without altering the cabinet box or shimming long runs. Since all cabinet legs in this line are made of steel, the connection from mounting plate through the tube remains rigid as the foot height is adapted, keeping the cabinet body steady once set.
The 2 inch diameter x 4 inch high Como furniture leg in brushed steel fits work where a compact support height is required beneath cabinets, work surfaces, or low furniture elements. Its 4 inch compacted height suits cabinets that must stay close to the floor while still clearing minor irregularities, such as utility room bases or shop cabinets under existing countertops. The brushed steel appearance coordinates with metal hardware, appliances, or commercial fixtures, bringing the leg visually in line with other steel components on the project. Because the leg is part of Peter Meier's Como Series of steel cabinet legs, it can be combined with 6, 8, and 10 inch compacted heights in the same space while retaining the same 2 inch diameter profile. This allows designers and installers to vary cabinet stance height in different zones and still maintain a unified look and leg geometry. The equipment and furniture legs classification places this component squarely in applications where the leg not only supports weight but also defines finished height and clearance.
The Como furniture leg's 660 lbs weight capacity per leg delivers a clear load rating, supporting layouts where heavy countertops, tools, or stored materials rest on the cabinet structure. When several of these steel cabinet legs are used under a run of cabinets, the defined capacity per leg lets installers distribute weight confidently across the footprint rather than relying on guesswork. The 2 inch diameter steel construction adds lateral stability, which matters when cabinets are subject to repeated opening, closing, or side loads from equipment. The 1-1/8 inch adjustable black plastic foot contributes to final leveling, reducing the need for separate shims and helping doors, drawers, and work surfaces align cleanly across long installations. The brushed steel surface brings the leg in line with other work surface & tables hardware, giving fabricators a support component that visually matches modern metal-based designs. With the 552-10-ST identifier tied to this exact configuration, replacements or additions can be matched to existing legs so cabinet runs keep the same height, diameter, and appearance over time.
The Como furniture leg measures 2 inches in diameter and 4 inches high at compacted height, which sets the basic profile and finished stance height under cabinets or furniture bases.
This Camar Como cabinet leg has a weight capacity of 660 lbs per leg, allowing it to support heavy cabinets, work surfaces, or tables when multiple legs share the overall load.
The 1-1/8 inch adjustable black plastic foot lets installers fine-tune leg height, helping cabinets or work surfaces sit level across slightly uneven floors without modifying the cabinet box.
This 4 inch Como furniture leg is made of steel with a brushed steel appearance, which provides rigid structural support while matching other brushed steel components in the project.
This leg is part of Peter Meier's Como Series of steel cabinet legs and represents the 4 inch compacted height option, aligning with 6, 8, and 10 inch versions for coordinated layouts.
This Como furniture leg uses a 3 inch square mounting plate, which establishes a stable connection point to the cabinet bottom and helps spread loads into the cabinet structure.
The 2 inch diameter x 4 inch high Como furniture leg in brushed steel from Camar delivers a steel cabinet support with a defined 660 lbs per leg capacity, an adjustable 1-1/8 inch foot, and a 3 inch square mounting plate to anchor cabinets, work surfaces, or tables at a compact height.
Sold In: 1 Each
