Metal cabinet legs 10 inch height give a fixed support height for cabinets, work surfaces, and tables where a 10 inch compacted height is needed. The Como Series from Peter Meier is described as a premium line of steel cabinet legs, so these legs bring that series into cabinet and table builds that need a metal support rather than a wood base. Each leg is made of steel, which provides a rigid structure under static loads in typical cabinet applications. The legs are 2 inches in diameter, so they spread weight over a wider footprint than narrow posts and help reduce point loading on floors. A black plastic foot with 1-1/8 inch adjustment range allows small height changes, which helps level a run of cabinets when floors vary slightly. The chrome finish presents a metal appearance suited to exposed bases on work surfaces and tables.
Each metal cabinet leg is paired with a 3 inch square mounting plate, so the load transfers from the steel tube into the cabinet or table bottom through that plate area. The mounting plate format gives a defined interface so installers can position the leg consistently at corners or support points. The black plastic foot has 1-1/8 inch of adjustment, which allows small turns at the base to set final height once the leg is mounted to the cabinet body. With a 10 inch compacted height, the usable range increases slightly through that foot adjustment, so final top elevation can be tuned within that window to match adjacent units or existing surfaces. The 2 inch diameter ties into this mounting setup, as the leg tube remains centered over the plate for predictable load paths.
The Camar metal cabinet legs in this Como Series sit in the Equipment and Furniture Legs class, so they align with work surface and table leg use rather than light decorative trim. In the Work Surface & Tables category, a 10 inch compacted height supports projects that need lower standoffs than full-height bases while still holding significant loads. The chrome finish on these steel legs fits exposed modern cabinet bases or tables where the support remains visible. Because weight capacity per leg is 660 lbs, these cabinet legs handle heavy work surfaces or cabinets when multiple legs share the load at the corners and intermediate positions. The 2 inch diameter design works under cabinets, equipment stands, and tables where a round footprint is preferred.
The Como Series structure uses steel throughout the cabinet legs, so each leg reacts in a consistent way when loaded, which assists in setting up repeatable layouts across a job. The 3 inch square mounting plate provides a defined pattern for locating legs in similar positions on multiple cabinets or work surfaces, important when building rows of units. The 1-1/8 inch adjustable black plastic foot gives a controlled range for dialing in height, so an installer can bring multiple cabinets into plane even when floor conditions change slightly from one location to another. With a 10 inch compacted height, installers know the starting dimension from cabinet bottom to floor before adjustment, which supports planning for toe space, equipment clearances, or ergonomic working heights. The 2 inch diameter and 660 lb per-leg capacity combine to deliver vertical support that stays within the design envelope of equipment and furniture legs used on substantial work surfaces.
The metal cabinet legs have a 10 inch compacted height, and the black plastic foot provides 1-1/8 inch of adjustment, so the usable height range spans that base dimension plus the foot travel.
Each cabinet leg has a weight capacity per leg of 660 lbs, so multiple legs can share substantial static loads on cabinets, tables, or work surfaces.
The Camar Como Series cabinet legs are made of steel, so they provide a rigid metal support suitable for equipment and furniture legs in cabinet and table applications.
Each steel cabinet leg is paired with a 3 inch square mounting plate, so the leg attaches to the bottom of the cabinet or table through that plate interface.
These chrome cabinet legs use a black plastic foot with 1-1/8 inch adjustability, allowing fine tuning of the installed height to level cabinets or tables on uneven floors.
The 10 inch Como Series cabinet leg fits work surfaces and tables in the Equipment and Furniture Legs class where a moderate stand-off height and 660 lb per-leg capacity are required.
The Camar Como Series metal cabinet legs combine a 10 inch compacted height, 2 inch diameter steel tube, and 660 lb per-leg rating to support substantial cabinets, work surfaces, and tables. The chrome finish and 3 inch square mounting plate align with projects where the support remains visible and needs consistent placement. With a black plastic foot providing 1-1/8 inch adjustment, these legs help bring tops into plane across a run of cabinets on variable floors. For builds that fall into the Work Surface & Tables category and need equipment and furniture legs with known dimensions and capacity, this Como Series option gives a defined, repeatable support solution.
Sold In: 1 Each
