Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2 inch diameter Como furniture leg from Camar gives cabinets and furniture a steel support point that carries up to 660 lbs per leg, which allows heavy installations to stand on fewer legs in residential or commercial projects. The 4 inch high design sets a low cabinet or work surface height, useful where clearance below the case must be controlled. The chrome finish presents a bright metal look on visible installations, matching other chrome elements around the base area. This leg is part of Peter Meier's Como Series, so it follows a consistent style and construction across the range, which helps when combining different heights on related pieces. All cabinet legs in this series are made of steel, providing a rigid structure that resists deformation under rated loads during long-term use.
The 4 inch high Como furniture leg uses a 3 inch square mounting plate, which provides a broad interface against the cabinet or furniture base for stable attachment. A 1-1/8 inch adjustable black plastic foot threads out from the bottom area, giving a fine adjustment zone to level the run relative to the floor. Because the leg is 2 inches in diameter, the load path from mounting plate to foot stays centered, which helps the adjustment stay steady after the final height is set. The steel construction of the cabinet leg supports the 660 lb capacity per leg when mounted to a suitable substrate, so fewer legs may be needed under shorter spans where design permits.
The 4 inch high Como furniture leg, identified as Camar part 552-10-C1, suits work surface and table projects defined in the Work Surface & Tables category, where a shorter stance is required. Being part of the Equipment and Furniture Legs product class, it is suited to cabinets, work tables, and similar furniture needing a defined clearance to the floor. The 2 inch diameter steel body offers a substantial presence at the base, which matches installations where the leg is fully visible rather than hidden by a toe kick. The chrome finish makes this leg a natural choice when other visible parts, such as pulls or exposed frames, are also chrome, so the base hardware does not visually clash with upper hardware choices. Because the leg is one of several Como Series heights - 4, 6, 8, and 10 inches (compacted height) - this 4 inch version can be chosen specifically where the lowest of these standard heights best meets the design or ergonomic target while still matching taller Como legs used elsewhere in the project.
All cabinet legs in Peter Meier's Como Series are made of steel, which gives this 4 inch leg the strength to support its 660 lb per leg rating under typical cabinet and furniture loads. The steel structure ties the 3 inch square mounting plate to the 2 inch diameter shaft, so force from the case transfers efficiently down to the adjustable foot. The 1-1/8 inch adjustable black plastic foot under the leg lets the installer raise or lower that corner within its adjustment range, which helps align door reveals or work surface levels when floors vary. Because the adjustment sits at the bottom, minor height changes do not disturb the mounting plate position against the cabinet, keeping the attachment area stable while the foot is tuned. The defined heights of 4, 6, 8, and 10 inches (compacted height) across the Como line also streamline layout; selecting this 4 inch version sets the starting height, then the 1-1/8 inch adjustment capacity on the foot offers the fine-tuning band needed for finished alignment without redesigning the case.
The Camar 552-10-C1 Como furniture leg is 4 inches high, so it sets a low cabinet or table height that suits base units needing modest floor clearance without raising the work surface excessively.
This Como Series steel cabinet leg has a weight capacity of 660 lbs per leg, allowing heavy cabinets or work surfaces to stand securely when the load is distributed across properly placed legs.
The Como furniture leg uses a 1-1/8 inch adjustable black plastic foot, giving a usable range to compensate for floor variations while keeping the cabinet or furniture level across its span.
This 4 inch high Como furniture leg uses a 3 inch square mounting plate, which spreads load over a larger area of the cabinet bottom for a stable attachment point.
All cabinet legs in Peter Meier's Como Series are made of steel, providing a rigid structure that supports the stated weight capacity during long-term cabinet or furniture use.
This 2 inch diameter Como furniture leg has a chrome finish, giving a bright metal appearance that coordinates well with other chrome components in a cabinet or table installation.
The 4 inch high, 2 inch diameter Como furniture leg from Camar combines a 660 lb per leg capacity, steel construction, and chrome finish for visible cabinet and furniture bases. The 3 inch square mounting plate, 1-1/8 inch adjustable black plastic foot, and defined Como Series height range give the control needed to set and fine-tune cabinet or work surface height on real projects.
Sold In: 1 Each
