Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Metal cabinet legs 6 inch height in brushed steel from Camar provide a steel support solution for cabinets, work surfaces, and tables where a defined 6 inch leg height is specified. These legs belong to Peter Meier's Como Series, a premium line of steel cabinet legs, so the construction centers on steel for strength in cabinet and furniture applications. Each leg is part of the Equipment and Furniture Legs class, aligning it with projects that require structural support rather than decorative trim pieces. The leg height of 6 inches, described as one of four compacted heights in the Como Series, fits layouts where a moderate elevation is needed under casework, counters, or workstations. A brushed steel finish ties in with metal-framed furniture, appliance toe areas, and commercial cabinetry where a straightforward steel look is preferred in visible installations.
This 6 inch Como Series steel cabinet leg is supplied with a 3 inch square mounting plate, giving a defined interface between the cabinet bottom and the vertical leg. The plate shape and size concentrate mounting locations in a compact footprint, which suits narrow cabinet rails or defined corner areas on furniture bases. The 1-1/8 inch adjustable black plastic foot at the bottom of the leg alters the working height around the 6 inch compacted dimension, so installers can take up minor floor variations without altering the cabinet box. With a 2 inch diameter steel tube, the leg offers a stable column from mounting plate to floor, giving installers a predictable geometry when laying out leg positions along cabinet or table runs.
This 6 inch height brushed steel cabinet leg fits into the Work Surface & Tables category, so it aligns with projects that elevate work surfaces, tables, and cabinets to a fixed working height above the floor. The 660 lb weight capacity per leg supports heavy work surfaces, reception counters, or casework runs where each support must hold substantial weight from cabinets and tops. As a member of Peter Meier's Como Series, this leg integrates with other Como heights at 4, 8, and 10 inches, allowing the same design language to extend through varied-height furniture in offices, shops, and residential projects. The brushed steel finish works with appliances and metal components in kitchens, labs, or utility spaces, tying support legs into the rest of the visible hardware. Because all cabinet legs in the Como Series are made of steel, this 6 inch model fits environments where a metal support element is preferred in the structure of equipment stands and furniture bases.
The 3 inch square mounting plate supplied with this Como Series leg creates a regular interface for installers, so leg placement can be repeated consistently from cabinet to cabinet across a project. With a 2 inch diameter leg, contact between the mounting plate and the leg is centered and predictable, which helps maintain alignment when several legs are placed along a run of casework or beneath a long table. The 1-1/8 inch adjustable black plastic foot at the base provides vertical adjustment without altering the 6 inch compacted leg height, which lets installers correct for floor irregularities while preserving a consistent cabinet or table elevation. The 660 lb per-leg weight capacity gives a defined load limit, so the number of legs can be chosen to reflect the expected load on long counters or equipment benches. As part of a premium steel cabinet leg series, the 552-15-ST part number ties directly to the 6 inch brushed steel configuration, which supports accurate reordering when additional legs are required for matching expansions or repairs.
The Camar Como Series cabinet leg has a 6 inch compacted height, which sets a moderate clearance under cabinets, tables, or work surfaces in installations that call for this specific elevation.
Each 6 inch Como Series leg has a weight capacity of 660 lbs, so individual supports can carry heavy cabinet loads or dense tops when spaced appropriately along the footprint.
The leg uses a 1-1/8 inch adjustable black plastic foot, allowing height changes around the 6 inch compacted dimension to level cabinets or tables on uneven flooring.
The Como Series metal cabinet leg has a 2 inch diameter, providing a wide support column that spreads load between the cabinet interface and floor contact area.
The 6 inch Como cabinet leg is used with a 3 inch square mounting plate, creating a defined interface area for attaching the leg to the underside of cabinets or furniture frames.
All cabinet legs in the Como Series are made of steel, so the 6 inch brushed steel version uses steel construction suited to cabinet, table, and work surface support.
The Camar 6 inch Como Series metal cabinet leg in brushed steel combines a 2 inch diameter steel body, 660 lb weight capacity, and a 1-1/8 inch adjustable plastic foot to support cabinets and work surfaces. With its 3 inch square mounting plate and defined height within a coordinated Como Series range, this leg fits projects that call for repeatable layouts and steel construction. Use this 552-15-ST configuration when a 6 inch compacted height, brushed steel appearance, and Como Series steel design match the demands of your cabinet, table, or work surface installation.
Sold In: 1 Each
