2 inch diameter 6 inch high Como furniture leg identifies this Camar cabinet and furniture support as a precise 2 inch round leg at a 6 inch height, which helps match it to cabinet layouts and work surface designs that need that specific height and footprint.
The leg is part of Peter Meier's Como Series, which defines it as one of their steel cabinet legs, so it aligns with other Como Series components when a project uses the same visual and structural language across multiple cabinets or tables.
The Como Series is described as a premium line of steel cabinet legs, which indicates a steel construction approach aimed at demanding cabinet and furniture applications where a metal leg is preferred over lighter materials in daily service.
All cabinet legs in this line are made of steel, so this leg relies on a steel body that supports cabinets, work surfaces, and tables in woodworking and shop environments where a metal support is used to carry structural loads.
The leg is finished in glossy black, so the exterior presents a shiny black finish that coordinates with dark casework or hardware and gives a consistent appearance when multiple legs from the series are used on the same installation.
The leg works with a 3 inch square mounting plate, which provides a defined mounting interface at the cabinet or furniture base so the installer fastens the plate to the underside and then uses the plate footprint to secure the leg in the correct position.
The mounting plate's 3 inch square size gives a predictable, compact mounting area that fits well under many cabinet and furniture bases, helping position the leg consistently near corners or support points without extending beyond typical bottom panel dimensions.
The leg height of 6 inches, combined with the 1-1/8 inch adjustable black plastic foot, creates a practical mounting combination where the main leg length sets the nominal elevation and the foot adjustment allows final leveling once the mounting plate is fixed.
The product is classified in the work surface and tables category under table legs, which places its mounting approach in line with how equipment and furniture legs are commonly used to support tops and cases in woodworking and shop construction.
The manufacturer part number 552-15-02 identifies this exact Como furniture leg configuration, so it ties directly to a 2 inch diameter, 6 inch high, glossy black steel leg with its associated mounting plate, which is useful when repeating a successful build or specifying the same leg again.
The product sits in the equipment and furniture legs class, so it is positioned specifically for cabinets, work surfaces, and tables that rely on individual legs rather than continuous bases, aligning it with modular casework or freestanding furniture projects.
The 6 inch high cabinet leg measurement makes it suitable for installations that require a mid-height base, such as work surfaces that need clearance beneath for storage or utilities while still keeping the overall cabinet height within a targeted zone.
The Como Series height range of 4, 6, 8, and 10 inches allows this 6 inch high cabinet leg to be part of a project mix where some units sit lower and others higher, while maintaining the same 2 inch diameter and glossy black visual style across all elevations.
The weight capacity per leg of 660 lbs supports its use under substantial cabinets, tables, or work surfaces where heavy loads are expected, allowing designers to calculate support points knowing each leg is rated for a clearly stated static capacity.
The 1-1/8 inch adjustable black plastic foot cabinet leg detail provides on-site adjustability under each leg, which lets installers correct for floors that are out of level by up to about 1-1/8 inch while still working from the same nominal 6 inch leg height.
The foot is described as black plastic and adjustable, so the adjustment mechanism is integrated into a black plastic component at the base, helping maintain a dark visual at floor level while also giving a smooth interface where the leg meets various floor surfaces.
The 2 inch diameter table leg dimension keeps the leg profile consistent across Como Series pieces, which simplifies layout when spacing multiple legs under long runs because each support occupies the same circular footprint on the underside of the case.
The leg construction uses steel for all cabinet legs in the series, so every leg in this line, including this 552-15-02 version, shares a steel structure that responds predictably under load and aligns with expectations for metal-based support elements in cabinetry.
The glossy black steel furniture leg finish allows the leg body to visually coordinate with other black components in the project, contributing to a uniform appearance where exposed legs are part of the overall design instead of concealed structural elements.
The product placement under work surface and tables | table legs means its adjustment and structural details are geared toward supporting horizontal surfaces and cabinets, giving installers a leg style that fits within standard furniture and work surface design practices.
The Como furniture leg has a 2 inch diameter and a 6 inch height, so it occupies a 2 inch round footprint while lifting cabinets or work surfaces by 6 inches before using the adjustable foot.
The 552-15-02 cabinet leg has a weight capacity per leg of 660 lbs, which lets it support heavy cabinets, work surfaces, or tables when loads are distributed across the appropriate number of legs.
The Como leg uses a 1-1/8 inch adjustable black plastic foot, giving about 1-1/8 inch of height adjustment for leveling cabinets or tables after the mounting plate and leg are installed.
All cabinet legs in the Como Series are made of steel, so this Camar leg uses a steel body for structural support in equipment and furniture leg applications.
The 6 inch high cabinet leg works with a 3 inch square mounting plate, which is fixed to the furniture base and used as the interface for securing the leg underneath the cabinet or work surface.
The 2 inch diameter Como leg has a glossy black finish, which presents a shiny black appearance that coordinates with dark cabinets or hardware in visible leg installations.
The Camar 2 inch diameter 6 inch high Como furniture leg in glossy black pairs a steel construction with a 660 lb per leg rating, giving cabinetmakers a clearly defined support option with known height, diameter, and load capacity for their projects.
The combination of a 3 inch square mounting plate, 6 inch height, 2 inch diameter, and 1-1/8 inch adjustable black plastic foot gives installers a predictable leg system for cabinets, work surfaces, and tables where leveling range and consistent appearance are important.
Sold In: 1 Each
