Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
metal cabinet legs 10 inch from the Peter Meier Como Series provide a 10 inch compacted height leg that supports cabinets, work surfaces, and tables while keeping a consistent finished elevation across a run of casework. The leg is part of Camar's Como Series premium line of steel cabinet legs, so the body is made of steel, which gives a rigid support structure that resists flexing when casework is loaded. Each leg has a weight capacity per leg of 660 lbs, allowing heavy cabinets or work surfaces to stand on fewer supports without overloading a single point. The leg diameter is 2 inches, which spreads the load over a wider footprint and helps reduce point pressure on flooring. A matte or flat black appearance lets the leg visually tie into darker casework or disappear under counters in commercial and residential layouts.
The 10 inch compacted height leg works with an adjustable black plastic foot, allowing fine tuning of installed height after the cabinet is in place. This black plastic foot provides a small adjustment range that helps compensate for minor floor variations while still holding the main steel tube at a consistent compacted dimension. The legs interface with a 3 inch square mounting plate, so the connection footprint to the cabinet bottom is clearly defined and sized for typical cabinet base rails. That mounting plate geometry helps distribute vertical forces from the 2 inch diameter leg into the cabinet floor, which is important when the 660 lb capacity per leg is used near its limit. With these details, installers can aim for level runs even when substrate conditions vary.
The Camar Como Series metal cabinet legs 10 inch height, matte black configuration suits cabinets, work surfaces, and tables that require a taller stance, because the compacted height of 10 inches sets the distance from floor to cabinet bottom before top build-up. In a cabinet run, using legs that are 2 inches in diameter gives each unit a substantial round footprint that aligns well with wider cabinets and deeper work surfaces. The flat black finish ties into dark toe-kick shadows or exposed industrial looks, allowing this leg to support both concealed and visible installations. Because the product is in the equipment and furniture legs class, it matches applications where a discrete structural support is needed under casework, tables, or workstations. The defined part number 552-25-19 helps shops specify and reorder the exact same 10 inch configuration.
The adjustable black plastic foot on this Como Series steel cabinet leg allows the installer to fine-tune height without cutting or altering the steel tube, which speeds leveling across a row of cases. Since weight capacity per leg is 660 lbs, planners can calculate leg spacing based on expected loads and place enough supports to keep each leg within its rating. The 3 inch square mounting plate creates a clear template for layout on cabinet bottoms, helping installers align legs consistently from unit to unit. All cabinet legs in this line are made of steel, so they share the same basic structural behavior, which simplifies planning when mixing the available 4, 6, 8, and 10 inch compacted heights in one project. With a 2 inch diameter profile, the leg provides a sturdy column that visually communicates strength while matching other Como Series supports.
The leg has a 10 inch compacted height, so it sets the main distance from floor to cabinet bottom before using the adjustable black plastic foot for fine leveling.
Each leg has a weight capacity per leg of 660 lbs, allowing it to support heavy cabinets, work surfaces, or equipment zones when spaced appropriately under the structure.
The legs are 2 inches in diameter, so each support presents a broad round profile that helps spread load and enhances stability under cabinets or tables.
The leg has a 1-1/8 inch adjustable black plastic foot, allowing small height changes to level cabinets over uneven floors without altering the steel tube.
This leg uses a 3 inch square mounting plate, giving a defined contact area on the cabinet bottom and helping distribute vertical loads into the casework.
All cabinet legs in the Como Series are made of steel, so different height options share the same structural material characteristics.
The Camar metal cabinet legs 10 inch height, matte black from the Peter Meier Como Series offer a steel construction, 2 inch diameter profile, and 660 lb capacity per leg that support demanding cabinet, table, and work surface projects. The 10 inch compacted height and 1-1/8 inch adjustable black plastic foot help align finished heights when floors are irregular. With a defined 3 inch square mounting plate and part number 552-25-19, this leg can be specified consistently across drawings and reorders. Wurth Baer Supply lists this Como Series leg for shops and serious installers who want a known, repeatable support component for cabinets and work surfaces.
Sold In: 1 Each
