2 inch diameter 8 inch high Como furniture leg provides a steel support solution for cabinets and furniture in work surface and table applications, so installers can match structural needs with a defined height. The leg height is 8 inches, giving a consistent elevation for cabinets or furniture frames where this dimension is required. All cabinet legs are made of steel, which provides a rigid support structure under work surfaces and tables. The leg has a chrome finish, so visible installations can align with chrome hardware or trim on the project. Weight capacity per leg is 660 lbs, which allows heavy cabinets or tables to be supported with fewer legs while staying within rated load. The leg features a 1-1/8 inch adjustable black plastic foot, so minor floor variations can be taken up without cutting the leg, helping achieve a level run across multiple units.
All cabinet legs are made of steel, so the mounting interface between the leg and structure stays stable once secured to the cabinet or table frame. Legs are 2 inches in diameter, which gives a predictable mounting footprint that works with the supplied 3 inch square mounting plate when positioning on cabinet corners or rails. The leg is 8 inches high, so installers can plan drilling or layout for that elevation across a run of cabinets or furniture pieces. The leg has a 1-1/8 inch adjustable black plastic foot, which allows fine-tuning at the floor to align adjacent units and create a continuous level surface. The cabinet leg is identified by manufacturer part 552-20-C1, so matching mounting and height characteristics can be repeated on later installs by ordering the same part.
The product is classified under equipment and furniture legs in the work surface and tables category, so it is intended to support cabinets, work surfaces, or tables where a defined steel leg is needed. The leg is 8 inches high, which suits layouts that call for an 8 inch separation between the floor and the cabinet or furniture bottom. Legs are 2 inches in diameter, providing a substantial profile that works under heavier cabinetry or wider table frames. The chrome finish matches projects where exposed support elements are part of the design, so the leg can be left visible without conflict with other chrome components. Weight capacity per leg is 660 lbs, making this leg appropriate for applications where significant static load is concentrated on each support point.
The leg has a 1-1/8 inch adjustable black plastic foot, which lets installers correct small floor irregularities while keeping the steel portion of the leg at a consistent visible height. This adjustment helps multiple cabinets or tables align in a straight, level line even when the substrate is uneven. Legs are 2 inches in diameter, so placement relative to cabinet corners and rails can be standardized from project to project, simplifying layout and drilling patterns. The leg is 8 inches high and part of Peter Meier's Como Series, so designers and installers can specify this exact size and line when they need repeat height and style on future work. The product is identified as manufacturer part 552-20-C1, allowing consistent reordering when a project standard calls for this exact cabinet leg configuration.
The 552-20-C1 cabinet leg is 8 inches high, which sets the cabinet or furniture bottom 8 inches above the floor before adjustment from the black plastic foot.
Each Como Series steel cabinet leg has a weight capacity per leg of 660 lbs, so it can carry substantial static loads in cabinet and work surface applications.
The Camar Como furniture leg is made of steel, providing a rigid support structure for equipment and furniture legs in work surface and table installations.
The leg has a 1-1/8 inch adjustable black plastic foot, allowing fine height adjustments at the floor to level cabinets or tables across uneven surfaces.
The cabinet leg has a 2 inch diameter, so it provides a broad base and a consistent profile that matches the associated 3 inch square mounting plate footprint.
This Como Series cabinet leg is identified by manufacturer part number 552-20-C1, so the same steel, height, and diameter combination can be specified again.
The Camar Como Series metal cabinet leg with 2 inch diameter and 8 inch height offers a steel support option with a chrome finish for visible cabinet and table applications. Weight capacity per leg is 660 lbs, supporting heavy surfaces at each point. The leg has a 1-1/8 inch adjustable black plastic foot, giving installers on-site flexibility to level runs without cutting steel. For projects that need repeatable height, appearance, and load rating, selecting part 552-20-C1 provides a defined standard for ongoing cabinet and work surface builds.
Sold In: 1 Each
