2 inch diameter 4 inch high Como furniture leg

2 Inch Como Furniture Leg For Stable Support

2 inch diameter 4 inch high Como furniture leg gives cabinets and furniture a defined height and footprint, so bases sit at a consistent 4 inch elevation for level installations across a run. The leg is part of Peter Meier's Como Series, so it follows a known geometry that coordinates with other Como components on a project. All cabinet legs are made of steel, which provides a rigid support structure when cabinets carry normal loads in kitchens, baths, or commercial work areas. The alumina finish on the leg presents a uniform surface, so exposed legs under work surfaces, tables, or cabinets match visually from one unit to the next. The leg works in the Equipment and Furniture Legs class, so it fits into layouts where a separate, defined support element is preferred instead of a solid base.

Steel Cabinet Leg Details That Support Workloads

• The leg is 2 inches in diameter, so the round footprint spreads load over a predictable area, which helps maintain stability under cabinets and work surfaces that see regular use.
• The 4 inch high Como furniture leg sets a consistent base height, which simplifies aligning cabinet bottoms or table frames when multiple units share a common toe space or work line.
• All cabinet legs are made of steel, so the vertical support resists deformation under typical static cabinet loads where rigidity and long-term alignment are important.
• The alumina finish on the steel leg provides a finished appearance, which matters when legs are visible below work surfaces or tables in residential or commercial installations.
• The leg weight capacity per leg is 660 lbs, so a single support can carry substantial static load, which gives flexibility for placing fewer legs under heavier cabinets or equipment where framing allows.

Mounting Plate And Adjustable Foot Setup

The Como Series leg uses a 3 inch square mounting plate, so the load transfers into the cabinet or table base over a defined area that suits many flat underside panels. The square plate format gives clear edges for positioning during layout, which helps keep each leg aligned to the cabinet footprint. The leg has a 1-1/8 inch adjustable black plastic foot, so height can be fine-tuned at the floor to handle minor unevenness while still targeting the 4 inch nominal height. This adjustment at the foot helps achieve smooth alignment of cabinet bottoms or table frames without reshaping the carcass or shimming the structure.

Using The Camar Como Leg In Real Projects

Where This 4 Inch Steel Leg Fits Best

This 2 inch diameter x 4 inch high Como furniture leg sits in the Work Surface & Tables and Table Legs category, so it suits applications where a defined leg set supports horizontal tops. The Equipment and Furniture Legs product class positions it for cabinets, workstations, or tables that depend on discrete legs rather than full plinths. The 660 lbs weight capacity per leg lets it support storage cabinets, work surfaces, or heavier fixtures within that static load window. Because all cabinet legs are made of steel, they form a rigid base under casework, which is useful where drawer and door clearances depend on stable geometry.

The alumina finish allows the 552-10-AO leg to sit in visible locations under tables or exposed cabinets while keeping a consistent surface appearance from piece to piece. The 2 inch diameter shaft presents a balanced scale for many cabinet depths, so the support looks proportionate under common kitchen, bath, or shop units. With the 3 inch square mounting plate, the leg connects cleanly to flat cabinet bottoms or frames, which fits production cabinet layouts where a defined mounting area is planned.

Details That Help Repeatable Alignment And Setup

The 1-1/8 inch adjustable black plastic foot on the Como Series leg provides fine vertical control, which supports leveling runs of cabinets or tables without altering the main case dimensions. Adjustability at the foot keeps the 4 inch nominal leg height workable across different floor conditions, so installers can dial in each support while maintaining a continuous front line. The 2 inch diameter steel construction gives each leg a predictable stiffness, which helps reduce movement when doors or drawers are used repeatedly over time.

The 3 inch square mounting plate standardizes the interface between the leg and cabinet bottom, which simplifies repeat installations using the same drilling or layout pattern across multiple units. With a weight capacity per leg of 660 lbs, layouts can be planned around known point loads, so cabinet designers can space legs to carry carcass weight and stored contents within that capacity. Tying all of these elements together, the Camar Como furniture leg with alumina finish and adjustable foot offers an organized approach to setting cabinet height, leveling, and load distribution using a consistent steel leg format.

Common Questions About This Como Furniture Leg

Choose This Camar Leg For Defined Support Height

The 2 inch diameter x 4 inch high Como furniture leg from Camar combines a steel body, alumina finish, and a 1-1/8 inch adjustable black plastic foot, so it sets a stable, level base under cabinets, work surfaces, and tables using a known 660 lbs per-leg capacity.