Metal Cabinet Legs 10" Height Aluminia provide vertical support for cabinets, work surfaces, and tables using a steel construction designed for equipment and furniture legs. Each leg belongs to Peter Meier's Como Series, so it follows a consistent design line when multiple legs are used on larger runs. The 10 inch compacted height sets a clear base dimension that helps establish counter or work surface height within a project layout. A 2 inch diameter steel tube spreads load over a broader footprint, which supports cabinets and work surfaces in heavier-duty applications. The Aluminia finish defines the visual appearance of the leg, which matters when legs remain visible on open bases or contemporary furniture pieces. These legs fall under the Work Surface & Tables category, which ties the geometry and appearance to typical cabinet and table installations where floor-standing support is required.
This Camar steel cabinet leg uses a 3 inch square mounting plate that creates a flat, defined interface against the cabinet or furniture base, so layout can follow regular spacing and repeated hole patterns. The 10 inch compacted height frames the starting vertical dimension from underside of the cabinet to the floor, which allows planning for toe kicks or clearances around equipment beneath the unit. A 1-1/8 inch adjustable black plastic foot at the bottom provides a limited adjustment range, giving room to compensate when finished floors vary slightly between corners or along a run. The 2 inch diameter tube ties directly between plate and foot, transferring cabinet loads down to the floor through a single steel member in the Como Series.
Camar Metal Cabinet Legs 10" Height Aluminia sit in the Work Surface & Tables category, so they are aligned with cabinets, workbenches, islands, and tables that rely on floor-standing legs instead of full side panels. The 10 inch compacted height defines a clear base elevation that works as a building block when combining cabinets with different leg heights from the same Como Series, such as 4, 6, or 8 inch legs, to handle stepped surfaces. A 2 inch diameter round profile offers a clean visual line and a stable stance, which fits environments where legs remain visible under open bases or modern casework. All cabinet legs in this line are made of steel, placing them in the Equipment and Furniture Legs product class where structural support is central to the role. The Aluminia finish ties these legs to projects that call for a metallic appearance around the base without changing the underlying steel structure.
The 1-1/8 inch adjustable black plastic foot built into each leg provides a controlled amount of vertical movement, allowing the installer to bring cabinets or work surfaces into plane when floors are uneven. Because the leg height is defined as 10 inches in compacted position, the adjustment range works upward from a known reference, so layouts can be drawn from that dimension across multiple cabinets or tables. The 3 inch square mounting plate on every leg standardizes the interface to the cabinet bottom, which simplifies drilling patterns and speeds repeated installations across banks of units. A weight capacity of 660 lbs per leg provides a clear load reference that supports planning leg count and spacing when cabinets carry heavy tops or equipment. Peter Meier's Como Series designation helps coordinate these legs with other legs in the same family, giving designers a consistent geometry and appearance when mixing different heights within one project.
The Camar 552-25-AO cabinet leg has a 10 inch compacted height, which sets the base elevation for cabinets or tables and provides a known starting dimension before using the adjustable foot.
Each Como Series steel cabinet leg has a weight capacity per leg of 660 lbs, which supports heavy cabinets or tops when multiple legs share the total load along a run.
The leg uses a 1-1/8 inch adjustable black plastic foot, allowing small vertical changes at the floor so cabinets or work surfaces can be brought level over minor floor variations.
Metal Cabinet Legs 10" Height Aluminia have a 2 inch diameter, giving a wider support point at the floor and helping stabilize cabinets or tables under load.
All cabinet legs in this Como Series are made of steel, which provides a rigid support structure for equipment and furniture applications that rely on floor-standing legs.
The 3 inch square mounting plate gives a flat, consistent interface on the cabinet bottom, helping repeat hole patterns and align multiple legs across a cabinet or table base.
Camar Metal Cabinet Legs 10" Height Aluminia combine a 10 inch compacted steel tube, 2 inch diameter, and 660 lbs per leg capacity to handle demanding cabinet, table, and work surface loads. The Como Series construction, adjustable 1-1/8 inch black plastic foot, and 3 inch square mounting plate work together to provide structured support and fine leveling in real installations. For projects in the Work Surface & Tables category that call for equipment and furniture legs, this 552-25-AO model offers a defined height, material, and load rating that align with heavy-use applications.
Sold In: 1 Each
