Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Metal cabinet legs 8 inch give cabinets and work surfaces a fixed 8 inch steel support point, which creates a consistent toe space and working height for base cabinets and tables. This Camar leg is part of Peter Meier's Como Series, so it follows a known line used across many cabinet projects that need coordinated legs. The 2 inch diameter steel construction provides a solid load path, which supports up to 660 lbs per leg and helps cabinets carry heavy contents without stressing the case. The alumina finish on the leg presents a neutral metallic look, which fits with common shop, office, and residential cabinet styles where exposed legs are visible. A black plastic foot built into the leg adjusts 1-1/8 inch, which lets installers fine-tune height where floors are uneven. The 8 inch compacted height option gives another height choice in the Como Series range of 4, 6, 8, and 10 inch legs.
The metal cabinet legs 8 inch height design pairs its steel tube with a 3 inch square mounting plate, which sets a clear attachment zone on the cabinet bottom. This plate-based mount gives installers a fixed pattern to work from, which simplifies repeating the same layout across several cabinets in a line. The adjustable black plastic foot built into the leg offers 1-1/8 inch of travel, which lets installers dial in final height after the cabinet is standing. Because the steel leg is 8 inch compacted height, the adjustment range operates around that dimension, which supports keeping runs of cabinets level even where floor dips or crowns are present.
These Camar metal cabinet legs 8 inch height units belong to Peter Meier's Como Series, which targets cabinet and table support projects that call for exposed steel legs. The 8 inch compacted height is one of four offered sizes at 4, 6, 8, and 10 inches, which lets shops select legs that match desired toe-kick or open-leg heights. Because each leg handles 660 lbs, a bank of legs under a long work surface can be laid out to carry significant loads from tools, files, or equipment while keeping the structure off the floor. The 2 inch diameter of the steel tube gives a sturdy visual proportion, which suits work surfaces and tables where the leg remains visible as part of the design. The alumina finish on the leg allows it to coordinate with typical metal-framed and laminate-faced cabinets, which streamlines using the same leg style across a project.
The adjustable black plastic foot with 1-1/8 inch of travel is integrated into the leg, which shifts fine adjustment to the point of contact with the floor rather than the cabinet body. That adjustment capacity allows installers to respond to floor irregularities, which reduces shimming under cabinet sides and helps maintain continuous countertop lines. The 3 inch square mounting plate fixed to the leg creates a defined interface at the cabinet bottom, which spreads the leg's 660 lb capacity over a square footprint for better load transfer into the carcass. Because the Como Series covers 4, 6, 8, and 10 inch compacted heights, the 8 inch version can be selected as a mid-height option, which helps match ergonomic working heights or cleaning clearance under cabinets. The steel construction across all cabinet legs provides a consistent structural behavior, which simplifies predicting how a multi-leg arrangement will perform along a full run of cabinets or tables.
The Camar 552-20-AO cabinet leg has an 8 inch compacted height, which sets the primary rise of the cabinet or work surface before using the built-in adjustment.
Each metal cabinet leg has a weight capacity of 660 lbs, which lets installers support heavy cabinets or work surfaces by spacing legs appropriately along the run.
The cabinet leg's black plastic foot adjusts 1-1/8 inch, which allows final leveling on uneven floors while holding the main leg body at its 8 inch compacted height.
The steel cabinet legs are 2 inches in diameter, which offers a broad, stable support column and a clean look on exposed work surfaces and table applications.
The 3 inch square mounting plate provides a defined attachment pad on the cabinet bottom, which spreads load and makes leg placement consistent from cabinet to cabinet.
These cabinet legs are made of steel with an alumina finish, which delivers structural strength along with a neutral metallic appearance on visible cabinet or table bases.
The Camar metal cabinet legs 8 inch height from Peter Meier's Como Series provide 2 inch diameter steel construction, 660 lb capacity per leg, an alumina finish, and a 1-1/8 inch adjustable black plastic foot, which together support level, consistent cabinet and table installations. The 3 inch square mounting plate ties each leg solidly into the cabinet bottom, which helps spreads loads across the carcass. For projects needing exposed legs at a defined height with on-site leveling capability, this 552-20-AO model gives a repeatable solution that fits directly into the Como Series height range.
Sold In: 1 Each
