Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2 inch diameter Como furniture leg describes a steel leg that supports cabinets and furniture while presenting a consistent round profile for layout and alignment. This Camar Como furniture leg is 10 inches high at compacted height, so it suits builds needing that specific vertical dimension before adjustment. The leg is made of steel, which provides a solid structural base for cabinets and work surfaces in daily use. A glossy black finish gives the leg a uniform look that visually matches dark casework and creates a clean transition from cabinet to floor. The leg weight capacity is 660 lbs per leg, so it can carry heavy cabinets or work surfaces without relying on extra structural framing at every point. A 1-1/8 inch adjustable black plastic foot at the bottom allows small height changes, which helps align multiple legs on uneven floors.
This Camar Como furniture leg uses a steel body with a 2 inch diameter, which provides a broad contact area against the cabinet bottom when paired with the 3 inch square mounting plate. The 10 inch compacted height defines the leg length before any adjustment, so installers can size plinths, toe spaces, or table frames to that dimension. The 1-1/8 inch adjustable black plastic foot at the base turns height into a controllable variable, allowing small up or down changes to compensate for floor variation while keeping the main steel section consistent in appearance. The glossy black finish extends over the visible surfaces of the steel leg, so once mounted at the corners or along cabinet runs, all exposed supports present a unified black look from different viewing angles.
This Como furniture leg from Camar is part of Peter Meier's Como Series, so it follows a consistent design language that fits cabinet and furniture builds using that series. The 10 inch compacted height aligns well with applications where a taller stance is needed, such as cabinets that sit above the floor for cleaning access or tables requiring additional clearance. With a 2 inch diameter steel tube, the leg provides a substantial visual and structural presence under casework, which is useful on longer cabinet runs or larger tables where small legs might look undersized. The glossy black finish allows the leg to visually integrate with dark cabinet exteriors, making it suitable for modern kitchens, workrooms, and furniture where supports remain visible. Because each leg has a 660 lbs capacity, a bank of several legs can support significant combined loads such as dense storage or heavy tops without overtaxing individual supports.
The steel construction of this Como furniture leg provides predictable rigidity under load, so once cabinets are leveled using the 1-1/8 inch adjustable black plastic foot, the setup stays stable during normal use. The adjustable foot at the bottom is especially important when multiple legs are installed under a single cabinet or table, because it lets installers dial in small height differences so all legs share the load evenly. The 2 inch diameter helps resist lateral wobble, contributing to a more solid feel when doors, drawers, or equipment are operated on the supported cabinet. The glossy black finish not only defines the appearance but also provides a smooth surface that is easy to keep visually clean in exposed installations. With the clearly stated 660 lbs per leg weight capacity, planners can repeat the same leg spacing pattern across similar projects, knowing each support carries a defined load range.
The Como furniture leg has a 10 inch compacted height, which sets the main support length before using the adjustable foot for fine leveling.
Each Camar Como steel cabinet leg has a weight capacity of 660 lbs, allowing it to support heavy cabinets, work surfaces, or storage loads at each support point.
The steel cabinet leg body is 2 inches in diameter, providing a wide, stable profile that supports heavier loads and improves side-to-side stability under cabinets.
This Como leg has a 1-1/8 inch adjustable black plastic foot, which lets installers fine-tune height to level cabinets or tables on slightly uneven floors.
The Camar Como furniture leg has a glossy black finish, giving projects a consistent dark appearance where the legs remain visible below cabinets or tables.
The manufacturer part number is 552-25-02, which identifies this specific 2 inch diameter, 10 inch high Como Series steel leg in glossy black.
This steel Como furniture leg from Camar pairs a 2 inch diameter profile, 10 inch compacted height, and 660 lbs per leg capacity to support serious cabinet and furniture projects. The glossy black finish and adjustable black plastic foot combine visual consistency with practical leveling capability, which streamlines setup across runs of cabinets or multiple tables. With its defined dimensions and load rating, this 552-25-02 Como Series leg offers a clear, repeatable option when planning support layouts for cabinets, work surfaces, or furniture that rely on exposed metal legs.
Sold In: 1 Each
