2 inch diameter Como furniture leg, 4 inch black

2 Inch Diameter Como Furniture Leg For Cabinets

2 inch diameter Como furniture leg provides a steel support option for cabinets, work surfaces, and tables where a compact, strong leg is needed. The Camar Como Series design centers on a cylindrical steel leg that manages heavy static loads in tight spaces, so a single leg can carry up to 660 lbs in fixed furniture applications. The 4 inch compacted height suits low base cabinets and installations where overall height needs to stay minimal while still lifting the casework off the floor. A flat black finish on the leg keeps the look understated for visible toe space or open furniture bases in shops, offices, and residential projects. This model is part of Peter Meier's Como Series, giving installers a consistent style to match other heights in the same line when a project mixes different cabinet or table heights.

Key Como Series Details That Support Your Build

• Weight capacity per leg of 660 lbs means one steel Como leg can serve in heavy cabinet or equipment stands where static loads are concentrated at individual corners, reducing the need for extra intermediate supports in many layouts.
• The 2 inch diameter round steel tube spreads load over a broader footprint at the top and bottom of the leg, helping cabinets and work surfaces feel solid under vertical pressure during daily use.
• The 4 inch compacted height gives a low-profile solution for base units that must stay close to the floor while still providing clearance underneath for cleaning access and visual separation from the subfloor.
• All cabinet legs in this Como Series are made of steel, giving a consistent material choice across different heights so mixed installations behave similarly under load and look uniform along a run of cabinets.
• A 3 inch square mounting plate at the top of the leg provides a defined interface to the cabinet bottom, so installers have a clear bearing area when laying out mounting positions on casework corners.
• The black flat appearance keeps the leg visually quiet, which suits projects where the cabinet face or work surface should draw attention instead of the support structure underneath.

Mounting And Height Details For Installation Work

The Como furniture leg uses a 3 inch square mounting plate at the top, giving a clear, flat interface for fastening to cabinet or table bottoms during layout and assembly. With a compacted height of 4 inches, this leg establishes a predictable starting dimension from floor to cabinet bottom in low-base applications, simplifying alignment across multiple units. The 2 inch diameter steel construction pairs with an adjustable black plastic foot at the base, so minor height changes can be made without altering the fixed steel portion of the leg. This combination lets installers fine-tune the final cabinet or work surface elevation within the limited range of the 1-1/8 inch adjustable foot while keeping the main leg body rigid.

Using The 4 Inch Camar Como Leg In Real Projects

Where This 4 Inch Como Furniture Leg Fits Best

This 4 inch Como Series furniture leg is designed for cabinets, work surfaces, and tables that call for a low overall height, such as base casework resting just above the floor or compact workstations. Because the leg is classified as an equipment and furniture leg, it suits both built-in cabinetry and freestanding pieces where stability under static weight is important. The 2 inch diameter gives the leg a substantial presence for corner or intermediate support points on heavier assemblies, while still remaining small enough to fit under narrow toe spaces. With a black flat finish, the leg blends beneath dark casework or disappears in shadowed recesses, supporting the visual emphasis on doors, drawers, and tops rather than the support structure. Being part of the Peter Meier Como Series also means this leg belongs to a family of steel cabinet legs that share a similar aesthetic, so installations using multiple heights along a project can keep a coordinated look from base cabinets to taller furniture elements.

Details That Support Repeatable Alignment And Setup

The 3 inch square mounting plate on the 4 inch Como furniture leg standardizes the footprint at every support point, which simplifies layout templates and drilling patterns when building multiple identical cabinets. Because all cabinet legs in this Como line are made of steel, their behavior under load remains consistent from piece to piece, helping maintain level runs of casework over time. The 1-1/8 inch adjustable black plastic foot at the bottom of the leg gives an installer controlled vertical play, so slight irregularities in floor flatness can be addressed by turning the foot rather than modifying the cabinet body. With a defined weight capacity of 660 lbs per leg, planners can calculate support spacing and leg count knowing each leg carries a documented load, reducing guesswork when placing supports under concentrated equipment or dense storage. The 4 inch compacted height serves as a repeatable reference dimension, so when multiple cabinets use this same leg model, their bottom edges align consistently across the room once the adjustable feet are set to the same working height.

Common Questions About This Camar Como Cabinet Leg

Selecting This 4 Inch Como Leg For Your Project

The 2 inch diameter Como furniture leg with 4 inch compacted height, steel construction, and 660 lb per leg rating gives installers a defined solution for low cabinet and table supports. The 3 inch square mounting plate and 1-1/8 inch adjustable black plastic foot combine to simplify layout and on-site leveling. For projects that use multiple pieces from Peter Meier's Como Series, this Camar model 552-10-19 helps keep both height and appearance consistent from unit to unit.