2 inch diameter 4 inch high Como furniture leg describes a steel cabinet and furniture support from the Peter Meier Como Series that carries a weight capacity of 660 lbs per leg, so one leg can support heavy cabinets, work surfaces, or tables in demanding shop and residential settings. The 4 inch compacted height gives a low, sturdy stance that suits base cabinets and low work surfaces where stability and a modest toe space matter. The leg diameter of 2 inches spreads the load across a wider footprint, which helps cabinets and furniture sit solidly on the floor. The glossy black finish provides a dark, uniform appearance that matches black casework or contrasts lighter cabinets while still presenting a clean, finished look. As a steel cabinet leg, it fits directly into equipment and furniture leg applications where metal construction and stated capacity are important.
This Como Series metal cabinet leg uses a 3 inch square mounting plate, so the load transfers from the cabinet bottom into a defined footprint that can be arranged near corners or structural rails. The 1-1/8 inch adjustable black plastic foot at the base gives vertical adjustment without tools described in the data, allowing installers to dial in final height differences within its range. Because the leg is 4 inches high at compacted height, the available adjustment sits above that base dimension, which helps fine-tune alignment where floors vary slightly from spot to spot. The steel leg body ties the mounting plate and foot together as a single unit, providing direct load transfer from cabinet to floor once adjusted.
This metal cabinet leg, with its 4 inch compacted height, fits cabinet and furniture layouts that call for a low profile under base units, such as storage cabinets, work surfaces, and tables within the work surface and tables category. The 2 inch diameter supports substantial vertical loads at each point, so legs can be spaced under wider cabinets or tables while respecting the 660 lb per leg capacity. The glossy black finish helps the leg visually coordinate with black or dark-toned casework, which matters when the leg remains visible beneath open bases. Because the leg comes from the Peter Meier Como Series, it aligns with other Como heights listed in the series, namely 4, 6, 8, and 10 inch compacted heights, so mixed-height projects can still share a common design language.
The 3 inch square mounting plate on this Como furniture leg establishes a repeatable interface to the cabinet or work surface underside, so each leg attaches through the same square footprint for predictable layout. With a 2 inch diameter steel body between plate and foot, the connection remains compact yet strong, which is important when positioning legs close to cabinet corners or recessed from edges. The 1-1/8 inch adjustable black plastic foot at the bottom introduces fine height control, so installers can compensate for floor variations while still holding close to the 4 inch compacted design height. Having all cabinet legs in the series made of steel means every support point behaves similarly under load, which simplifies planning leg counts and positions for equipment and furniture legs in this class.
This Como furniture leg is 2 inches in diameter and 4 inches high at compacted height, so it provides a low-profile support point with a broad, stable body for cabinets and furniture pieces.
Each steel cabinet leg in the Peter Meier Como Series has a weight capacity of 660 lbs per leg, allowing heavy cabinets, tables, or work surfaces to be supported by properly spaced legs.
The 1-1/8 inch adjustable black plastic foot lets installers fine-tune the final height of the leg, which helps level cabinets or tables on uneven floors while maintaining the intended compacted leg height.
The 3 inch square mounting plate spreads cabinet loads into a defined footprint on the cabinet bottom, giving a consistent mounting area for aligning multiple legs under a run of cabinets or a table.
This cabinet leg is made of steel and has a glossy black finish, providing a rigid support element with a dark, uniform appearance suitable for visible furniture and cabinet bases.
The 4 inch high Como leg suits base cabinets, work surfaces, and tables needing a low stance, where the compacted height and adjustment range allow functional toe space and leveling capacity.
The 2 inch diameter 4 inch high Como furniture leg from Camar combines a 660 lb per leg capacity, steel construction, and a glossy black finish to support cabinets and work surfaces within the equipment and furniture legs class. The 3 inch square mounting plate links directly to cabinet bottoms, while the 1-1/8 inch adjustable black plastic foot refines final height and level. For projects calling for a low, strong, visually consistent base, this Como Series leg offers defined dimensions and performance characteristics that can be planned into cabinet and table layouts with confidence in the stated capacity and geometry.
Sold In: 1 Each
