Como furniture leg 6 inch describes a Peter Meier Como Series steel cabinet leg that supports cabinets, work surfaces, and tables where a 6 inch compacted height is needed. The 2 inch diameter steel construction provides a solid bearing surface, helping distribute loads evenly under bases or furniture frames. The matte black finish establishes a consistent visual line under dark casework or tables, which matters when exposed legs are part of the design. The leg uses a 1-1/8 inch adjustable black plastic foot, giving a small range of height take-up that helps address minor floor variation without shimming. With a weight capacity per leg of 660 lbs, the component is suited to heavy cabinetry or work surfaces where concentrated loads are present. The design fits projects where a defined steel leg height and appearance are required for layout, level, and support.
The cabinet leg uses a 3 inch square mounting plate, creating a flat metal interface that fastens to cabinet bottoms or table frames where a square footprint is preferred. This plate concentrates the connection in a known geometry, which helps position legs consistently from corner or edge references. The 1-1/8 inch adjustable black plastic foot threads into the leg, so minor height changes are handled at the floor side instead of altering cabinet construction. This adjustment is useful when setting multiple legs under a long run, because the installer can dial in level across the length without reworking the casework. The 6 inch compacted height defines the main structural length of the steel tube, which matters when checking finished toe height, cleaning clearance, or chair fit under work surfaces.
This 2 inch diameter x 6 inch high Como furniture leg fits projects that call for equipment and furniture legs in the work surface and tables category. The leg is part of Peter Meier's Como Series, so it aligns with applications where matching legs in 4 inch, 6 inch, 8 inch, and 10 inch compacted heights may be used across different cabinets in the same room. The matte black finish ties into darker cabinet bases or metal frames, supporting installations where the leg is visible under islands, freestanding cabinets, or utility workstations. Because all cabinet legs in this series are made of steel, they suit environments that expect regular loading on corners and mid-span supports. The 660 lbs capacity per leg addresses situations such as heavy countertops, equipment on workstations, or storage cabinets that carry dense content on shelves.
The 2 inch diameter of the Camar 552-15-19 cabinet leg creates a stable stance, which helps resist wobble on taller units or on tables subject to side loads. The 6 inch compacted height provides a predictable finished leg length that simplifies planning toe space, ergonomic reach to work surfaces, and alignment with adjacent fixed bases. The 1-1/8 inch adjustable black plastic foot offers incremental height change, which helps correct for typical floor slopes or minor framing variations without modifying cabinet sides or frames. Since the leg uses a 3 inch square mounting plate, layout is straightforward: the plate width provides simple corner setbacks or centerline references on rails, producing repeatable leg positions across multiple units. With a weight capacity per leg of 660 lbs, designers and installers can assign leg counts to support expected loads on cabinetry, islands, or work tables while staying within that per-leg rating.
The Como furniture leg is 2 inches in diameter and has a 6 inch compacted height, so it sets cabinets or tables at that primary leg length before adjusting the plastic foot.
The Camar 552-15-19 leg has a weight capacity per leg of 660 lbs, allowing it to support heavy cabinets or work surfaces when multiple legs share the load.
The leg has a 1-1/8 inch adjustable black plastic foot, which provides fine height tuning at the floor to level cabinets or tables across uneven surfaces.
The 3 inch square mounting plate gives a defined flat interface for attaching the leg to cabinet bottoms or frames, helping position legs consistently from corners or edges.
This cabinet leg is made of steel with a matte black appearance, combining structural strength with a neutral finish that coordinates with many cabinet and table designs.
This 6 inch compacted height leg is part of the Como Series, which is offered in 4 inch, 6 inch, 8 inch, and 10 inch heights, allowing consistent style at different elevations.
The 2 inch diameter x 6 inch high Como furniture leg, matte black, brings together steel construction, a 660 lbs per-leg capacity, and a 1-1/8 inch adjustable black plastic foot, so cabinet and table projects gain defined support and leveling capability. The 3 inch square mounting plate and compacted 6 inch height give predictable geometry that aligns with layout dimensions on cabinet bottoms or table frames. For work surfaces, tables, or cabinets that require this height and appearance, choosing this Camar 552-15-19 leg from Wurth Baer Supply supports a clean design line and a structurally capable base.
Sold In: 1 Each
