Nickel Self-Close Concealed Hinge for Half Overlay Doors

The Salice Series 200 C2P6G99 is a half overlay concealed hinge with a self-close spring, built for face-frame and frameless cabinets where a screw-on mount is preferred and a clean nickel finish coordinates with the surrounding hardware.

Key Features

• Self-close spring pulls the door shut over the last few degrees of travel automatically.
• Half overlay, half crank arm positions two doors correctly on a shared center partition or sets a single door at a partial overlay.
• 110 degree opening delivers the standard everyday swing for cabinet access.
• Screw-on mount fastens the hinge directly to the cabinet without clip-on toolless plates, giving a solid mechanical connection.
• Nickel finish on plated steel blends with pulls, knobs, and other nickel hardware across the cabinet run.
• Side and height adjustment lets you dial in even reveals after the door is hung.

Where Half Overlay Geometry Does the Work

Half overlay is the configuration that handles two doors sharing a single center partition: each door covers about half of that partition edge, so both sit flush when closed without colliding on the hinge arms. It also works on single-door cabinets spec'd to a partial overlay rather than a full cover of the cabinet side. The 35mm cup bores into the back of the door, and the arm connects to a Salice base plate mounted to the cabinet, ordered separately. That plate is what sets the final door position, and only Salice plates pair correctly with this hinge arm.

Finish and Build for Visible Hardware Runs

The hinge body is plated steel finished in nickel, a neutral tone that holds up alongside satin nickel pulls, bar handles, and edge banding hardware without a color mismatch. Screw-on mounting is the choice when the cabinet's construction does not include pre-drilled 5mm system holes or when a fixed, screwed connection is the preferred standard for the shop. On face-frame cabinets, the plate screws to the stile. On frameless boxes, it mounts to the side panel. Either way, the connection is mechanical and won't shift with handling or seasonal movement.

The Right Shop and the Right Job

This hinge suits cabinet shops and contractors running half overlay or partial overlay specifications consistently across a project, whether the boxes are face-frame or frameless. It is a practical choice where clip-on plates are not in the workflow or where a screwed plate is the house standard. Homeowners replacing worn hinges on an existing run will find the nickel finish easy to match and the screw-on install straightforward. For a damped, cushioned close rather than a spring pull, the Silentia+ soft-close version of the Series 200 is the alternative to quote. For full overlay work on the same project, a full crank arm version of this series pairs with the same Salice plate family.

Common Questions

A Reliable Close in a Finish That Fits the Job

When the spec calls for half overlay doors that close on their own and the hardware finish is nickel, this Salice Series 200 hinge keeps the run consistent from the first cabinet to the last.