Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 concealed hinge positions inset doors flush inside the cabinet opening on face-frame and frameless cabinets, with a self-close spring and dowel cup mounting in a nickel finish.
An inset door sits inside the cabinet opening rather than lapping over it, so the door face is level with the frame or panel front. That look lives on tight, even gaps, and this hinge carries the geometry to put the door exactly there. The 35mm cup presses into the door via dowel holes, skipping the cup screws and speeding up the door-side installation step on a production run. The arm then connects to a Salice base plate fastened to the cabinet, with the plate ordered separately. Because overlay is set by the arm together with the plate, confirm your plate selection against the inset position before ordering.
The hinge is plated steel finished in nickel, a neutral tone that sits cleanly behind a closed inset door and coordinates with the nickel hardware a lot of traditional and transitional kitchens already carry. After the doors are hung, the height and side adjustment cams bring each door to a matching reveal without pulling the hinge off the plate. Inset work lives in those small gaps, and the ability to fine-tune in place is what keeps a flush-face installation looking right as the cabinets settle.
Reach for this hinge on face-frame or frameless cabinets where the design calls for inset doors and a self-close pull is the right closing behavior. It suits cabinetmakers doing custom furniture-style work, contractors finishing traditional kitchens, and shops handling multi-cabinet inset runs where the dowel cup speeds installation. For projects where a cushioned, damped close matters more than a spring pull, the Silentia+ soft-close version of this series is the closer match. For doors that overlay the cabinet side rather than sitting inside the opening, an overlay-geometry hinge is the correct choice.
Yes. The hinge arm connects to a base plate that mounts to the cabinet side or frame, and the plate is sold separately. Use a Salice plate matched to your cabinet type and the inset position. Plates are brand-specific, so plates from other manufacturers will not connect to this hinge.
The cup carries pre-attached dowels that press into bored dowel holes in the door rather than relying on cup screws. This is common in CNC and production environments where the door side is pre-bored on a line-bore machine, keeping the door-side step fast and consistent.
No. This hinge is self-close: a spring pulls the door shut once it reaches the last few degrees of travel. Soft-close uses a damper to slow the door so it settles quietly. If you need a damped, quiet close, choose the Silentia+ soft-close version of this series instead.
Yes. The 110 degree swing is the standard opening angle for everyday cabinet access and works well for inset doors. If wall clearance is tight, an angle-restriction clip can reduce the swing; confirm clip compatibility with Salice for this series.
When the job calls for inset doors that sit flush, close on their own, and hold an even reveal in nickel hardware, this Salice Series 200 hinge is the part to specify.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3000 Each |  UBS2XX85H9 Mfr# S2XX85H9 | Flange Cover Cap, Nickel | ||||
Sold in: 1 Each |  UBS2A637XF Mfr# S2A637XF | 94˚ Opening Angle Reduction Clip, Nickel-Plated | ||||
Sold in: 1 Each |  UBS2XX83A1 Mfr# S2XX83A1 | Hinge Arm Cover Caps White with No Logo | ||||
Sold in: 1 Each |  UBS2XX83A3 Mfr# S2XX83A3 | Plain Cover Cap for Hinge Arm, Black | ||||
Sold in: 1 Each |  UBC2P4P99 Mfr# C2P4P99 | Salice Series 200 110° Inset Hinge Free-Swinging Screw-On C2P4P99 | ||||
Sold in: 1 Each |  UBC2R4P99 Mfr# C2R4P99 | Salice Series 200 110° Inset Hinge Free-Swinging Dowel M ount C2R4P99 |
