Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 concealed hinge mounts inset doors that sit flush inside the cabinet opening on face-frame and frameless cabinets. The dowel mounting method and free-swinging motion make it a precise choice for push-to-open systems and other applications where a spring or damper is not wanted.
An inset door lives inside the cabinet opening rather than over it. It depends on even gaps on all sides, which means the hinge geometry has to place the door precisely every time it closes. This hinge does that with full-crank inset geometry and a 35mm cup that bores into the back of the door. The arm then connects to a Salice base plate on the cabinet, which is sold separately and should be matched to your cabinet construction.
The free-swinging mechanism is what sets this hinge apart from the self-close and soft-close versions of the same series. With no spring pulling the door shut and no damper slowing it, the door holds any position it is left in. That is the correct setup for push-to-open systems, where a retaining catch and a push mechanism handle opening and closing, and for any application where automatic closing is not needed or not wanted. A free-swinging door will not stay latched on its own without a catch or magnet, so plan accordingly.
The hinge is plated steel finished in Nickel. For inset work, where the reveal is the visible measure of quality, a clean hardware finish matters: Nickel coordinates with the brushed and satin metal tones common in both traditional and transitional interiors. The height and side adjustment built into the arm lets you dial the door back to an even gap as the cabinet settles over time, which is the kind of detail that keeps a flush-fitted door looking right for years.
This hinge suits cabinet shops, installers, and designers specifying inset doors on face-frame or frameless cabinets where the closing mechanism will be handled separately, whether by a push-to-open system, a touch-latch, or another device. It is built for standard doors in the 16 to 22mm thickness range. The dowel mounting fits CNC and production environments where pre-bored doors move through the shop without cup screws. For doors that need a spring close or a cushioned close, the self-close and Silentia+ soft-close versions of the Series 200 are the alternatives in this line. For doors outside the face-frame or frameless frameless context, or thicker than standard, a different hinge series is the right call.
Yes. The hinge arm connects to a Salice base plate that mounts to the cabinet, and that plate is sold separately. Use a Salice plate matched to your cabinet type. Plates are not interchangeable across brands.
Free-swinging means there is no spring and no damper. The door will not pull itself shut and will not slow as it closes. It stays wherever it is left. For the door to stay closed, a catch or magnet is needed, or a push-to-open mechanism that holds it until pressed.
The hinge cup carries pre-attached dowels that press into matching bored holes in the door, so no cup screws are needed. It is a clean, fast attachment for CNC-drilled doors in production environments.
Yes. Push-to-open systems require a free-swinging hinge, and this is one. You will still need a compatible push-to-open mechanism and a retaining device to keep the door closed between uses.
Specify this hinge when the design calls for flush inset doors with a controlled, mechanism-driven close and a Nickel finish that holds its look across the cabinetry.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3000 Each |  UBS2XX85H9 Mfr# S2XX85H9 | Flange Cover Cap, Nickel | ||||
Sold in: 1 Each |  UBS2A637XF Mfr# S2A637XF | 94˚ Opening Angle Reduction Clip, Nickel-Plated | ||||
Sold in: 1 Each |  UBS2XX83A1 Mfr# S2XX83A1 | Hinge Arm Cover Caps White with No Logo | ||||
Sold in: 1 Each |  UBS2XX83A3 Mfr# S2XX83A3 | Plain Cover Cap for Hinge Arm, Black | ||||
Sold in: 1 Each |  UBC2P6P99 Mfr# C2P6P99 | Salice Series 200 110° Inset Hinge Self-Closing Screw-On 2P6P99 | ||||
Sold in: 1 Each |  UBC2R6P99 Mfr# C2R6P99 | Salice Series 200 110° Inset Hinge Self-Closing Dowel Mount C2R6P99 | ||||
Sold in: 1 Each |  UBC276P99 Mfr# C276P99 | Salice Series 200 110° Inset Hinge Self-Closing Rapido C276P99 | ||||
Sold in: 1 Each |  UBC2J6P99 Mfr# C2J6P99 | Salice Series 200 110° Inset Hinge Self-Closing Logica C2J6P99 |
