Salice 200 Series Hinges For Cabinet Projects

Salice 200 Series hinges are designed for use in both residential and commercial cabinets, so one hinge family can cover typical shop runs for multiple project types. This Salice 200 Series self-close half overlay face-frame;frameless hinge in nickel gives a concealed cabinet hinge solution where the hardware stays out of sight but handles everyday door cycling. As a concealed cabinet hinge, it keeps the clean cabinet line while still allowing full functional adjustment at the hinge arm. The 110 degree opening angle lets doors swing wide enough for normal access without over-travel, which helps when cabinets sit near walls or appliances. The all steel hinge body provides a solid base for repeated opening and closing in regular cabinet service. The nickel plated finish adds corrosion resistance, supporting hinge performance in typical kitchen and bath environments.

Key Hinge Details That Support Daily Use

• The all steel hinge is nickel plated for corrosion resistance, which supports long-term hinge performance in kitchen, bath, or utility cabinets where moisture or cleaners are present.
• The hinge is permanently self lubricating utilizing environmentally safe lubricants, so the moving parts are designed to operate smoothly over time without separate lubrication work during normal cabinet service.
• Series 200 hinges exceed ANSI/BHMA Grade 2 standards, meaning the hinge design is tested beyond that performance level to handle repeated door cycles in everyday cabinet use.
• Series 200 hinges meet ISO9001 and ISO14001 environmental certifications, so the hinge is produced under documented quality and environmental management systems that support consistent output.
• Salice Series 200 hinges are designed for use in both residential and commercial cabinets, which lets shops standardize on one hinge platform across different job types and cabinet lines.

Mounting And Adjustment For Cabinet Fit

The 200 Series 110 degree opening hinges have a cup depth of only 11 mm, which helps this hinge work with most cabinet door profiles where deeper cups could break through thinner doors. A hinge cup edge drilling distance of 3 mm to 6 mm gives some flexibility when boring doors, allowing the same hinge to adapt to different overlay preferences and machining setups. Patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw provides usable lateral movement at the hinge, so doors can be shifted horizontally on the frame for even gaps after installation. This hinge uses press-in dowels as the fastening design, offering a quick insertion approach into the bored door cup for shops set up for dowel-based assembly.

How This Concealed Hinge Works In Practice

Half Overlay Hinge For Face-Frame And Frameless

This Salice 200 Series self-close half overlay face-frame;frameless hinge is built as a concealed cabinet hinge, so the hinge sits inside the cabinet and door rather than on the surface, keeping exterior lines uninterrupted. The half overlay geometry suits layouts where two doors share a partition or where a partial overlay is needed on a face frame, giving flexibility when designing cabinet fronts. Because the hinge is identified as suitable for both face-frame and frameless applications, it can be used across different construction styles within the same project line. Being part of the Salice Series 200 hinges family, it shares the same general design intent that serves both residential and commercial cabinets, allowing installers to draw on familiar boring and alignment practices from job to job.

Adjustable Hinge Designed For Repeatable Results

The patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw directly supports door alignment work after mounting, reducing the need to shift doors at the bore or modify the cabinet opening. With the cup depth of only 11 mm, the hinge simplifies boring standards on thinner or profiled doors, cutting down on scrap risk where deeper cups might weaken the panel. The hinge cup edge drilling distance of 3 mm to 6 mm lets a shop stay within a known boring window while still tuning overlay and reveal, which is helpful when matching existing cabinet runs or mixing door suppliers. As a self-close hinge, it is designed so the hinge action pulls the door closed at the end of travel, supporting consistent closing behavior across multiple doors in both residential and commercial cabinets. The all steel, nickel plated, permanently self lubricating construction is intended to maintain that action over time, so once alignment is dialed in with the hinge arm screw, the hinge structure supports that setting through repeated daily use.

Common Questions About This Salice Hinge

Selecting This Hinge For Your Cabinet Run

This Salice 200 Series self-close half overlay face-frame;frameless hinge in nickel combines a 110 degree opening, 11 mm cup depth, and patented side-to-side adjustment to support clean alignment on concealed cabinet doors. The all steel, nickel plated, permanently self lubricating hinge construction and performance level that exceeds ANSI/BHMA Grade 2 standards give a cabinet-ready option for residential and commercial work. When a job calls for a concealed cabinet hinge that works across face-frame and frameless layouts while staying within common boring dimensions, this C2R6G99 hinge offers a focused solution ready to drop into your hinge program.