Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 Logica hinge is a self-close, full overlay concealed hinge for frameless and face-frame cabinets, finished in nickel to coordinate with pulls, knobs, and other visible hardware throughout the space.
Full overlay geometry means the door covers almost the whole cabinet side when closed, with only a sliver of the panel or frame showing. This hinge is built for that layout on both frameless and face-frame boxes. The 35mm cup bores into the back of the door, and the arm connects to a Salice base plate mounted to the cabinet, sold separately. Once the plate is in place, the Logica arm clips on without tools, and the self-close spring takes over from there, pulling the door shut whenever it falls within range.
The hinge body is steel with a nickel finish. In a coordinated kitchen or bath, the finish choice matters even on a concealed hinge, because the arm is briefly visible each time a door opens. Nickel sits in the cool-neutral range and reads consistently alongside satin nickel bar pulls, cup pulls, and knobs without the contrast that a darker finish would introduce. The steel construction holds up to the repetitive loading of daily use without wearing the spring or the mounting connection.
Reach for this hinge on residential kitchens, bath vanities, and built-in casework where the hardware finish is part of the design plan and full overlay is the specified door position. It suits cabinet shops building frameless boxes as readily as face-frame construction, and it works for remodelers replacing worn hinges in an existing run where nickel hardware is already on the pulls and knobs. For jobs that call for a damped, cushioned close rather than a spring pull, the Silentia+ soft-close version of this series is the better choice. For doors thicker than about 22mm, a thick-door hinge is the right fit instead.
No. The hinge arm connects to a base plate that mounts to the cabinet, and the plate is sold separately. Use a Salice plate matched to your cabinet construction. Plates are brand-specific, so plates from other manufacturers will not connect to this hinge.
This hinge is self-close: a spring pulls the door shut over the last few degrees. Soft-close uses a damper to slow the door as it closes so it settles quietly without impact. If a cushioned, quiet close is the goal, choose the Silentia+ version of this series.
Yes. It is rated for both cabinet types. The base plate you select should match the construction: a wing or euro-screw plate for frameless, a face-frame plate for a frame-front cabinet.
The count depends on door height, width, and weight. As a general starting point, doors up to about 40 inches tall typically use two hinges, and taller doors use three or more. Check the Salice load table for the exact count for your door.
Choose this hinge when the project specifies full overlay doors, a nickel hardware finish throughout, and a self-close action that keeps every door pulled shut without a damper premium.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  UBS2A637XF Mfr# S2A637XF | Salice 94° Hinge Stop Device for Series 200 Hinges S2A637XF |
Sold In: 1 Each
