Salice 200 Series Free Swinging Full Overlay Face-Frame;Frameless Hinges Nickel, 110° Screw-On - C2P4A99

Salice 200 Series Hinge For Full Overlay Doors

Salice 200 Series hinge is a concealed cabinet hinge designed for both residential and commercial cabinets, so one hinge model can be used across mixed projects. This free swinging full overlay face-frame and frameless hinge keeps the door motion unassisted, which helps when a separate door control is used. The 110 degree opening angle lets the door clear the cabinet face more easily, which improves access to the interior. The hinge belongs to the concealed cabinet hinges class, so it keeps hardware hidden and the cabinet face clean. The all steel construction provides a solid hinge body for everyday cabinet use. Nickel plating adds corrosion resistance to the steel, which supports consistent motion in normal indoor cabinet environments. The hinge is part of the Salice 200 Series, which is compatible with Smove soft-close door devices, allowing soft-close functions to be added while keeping this same hinge type in the layout.

Key Salice 200 Series Hinge Advantages

• The 110 degree opening angle allows the door to swing wide, helping installers align interior hardware and providing better access for users during daily operation.
• The cup depth of only 11 mm lets the hinge work with most cabinet door profiles, which simplifies door selection and keeps boring depths manageable on standard equipment.
• The hinge cup edge drilling distance of 3 mm to 6 mm gives flexibility in boring location, which helps match existing drilling patterns and allows small layout adjustments on the shop floor.
• The patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw provides controlled horizontal alignment, which speeds fine tuning reveals and reduces door rework.
• The all steel hinge body, permanently self lubricating with environmentally safe lubricants, supports smooth movement over time, which reduces the need for maintenance on frequently used cabinet doors.
• The nickel plated finish provides corrosion resistance on the steel parts, which supports consistent performance in typical kitchen, bath, and commercial cabinet environments.

Installation And Screw-On Mounting Details

This Salice 200 Series hinge uses a screw-on cup fastening design, allowing the hinge cup to be secured with two #6 x 5/8 inch screws. That screw-on approach works well in solid wood and many engineered substrates, giving a familiar process for cabinet shops and installers. The specified hinge cup edge drilling distance of 3 mm to 6 mm means a standard line boring pattern can usually be used without redesigning jigs. The 11 mm cup depth keeps drilling relatively shallow, which suits common cabinet door thicknesses and reduces risk of breakthrough when boring. The patented parallel side-to-side adjustment is handled via a hinge arm screw, so installers can dial in door position after mounting without moving the cup holes. This adjustment range of plus 4.5 mm to minus 1.5 mm helps correct minor case or door dimension variations during installation.

Using This Free Swinging Hinge In Cabinet Builds

Where This Concealed Hinge Fits Best

This Salice C2P4A99 hinge is a free swinging full overlay hinge for both face-frame and frameless cabinets, so it can be applied across different box constructions in one job. The concealed design suits projects where visible hinges are not desired, such as kitchens, baths, and commercial casework. Because the hinge is part of the Salice 200 Series with a 110 degree opening angle, it works well on full overlay doors that need wide access without over-extending. Compatibility with Smove soft-close door devices allows this same hinge to be used where soft-close is required, by adding the Smove device, and where free swinging motion is preferred, by using the hinge alone. The all steel, nickel plated construction fits the demands of high-use cabinet installations by combining strength with corrosion resistance in typical indoor environments.

Adjustment, Motion, And Long-Term Performance

The patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw gives installers a practical way to refine reveals without reboring doors, which helps keep layout time predictable. Series 200 hinges exceed ANSI/BHMA Grade 2 standards, so the hinge is built to meet a recognized performance level that supports repeated opening and closing in everyday cabinet service. The hinges also meet ISO9001 and ISO14001 environmental certifications, tying the product to established quality and environmental management systems that matter on specified projects. Permanent self lubrication using environmentally safe lubricants keeps the motion of this concealed hinge smooth, which reduces friction effects during long-term use. As an all steel hinge that is nickel plated for corrosion resistance, the hinge body is suited to the humidity and cleaning cycles typical in kitchens and commercial spaces. The series carries a lifetime warranty, giving cabinet shops and installers a defined level of manufacturer-backed support for the hinge in long-term installations.

Common Questions About Salice 200 Series Hinge

Selecting This Hinge For Your Next Cabinet Run

The Salice concealed cabinet hinge combines a 110 degree opening angle, 11 mm cup depth, and 3 mm to 6 mm cup edge drilling distance, so it fits many full overlay layouts with standard boring. The patented side-to-side adjustment range of plus 4.5 mm to minus 1.5 mm via the hinge arm screw supports precise reveal alignment on site. With an all steel, nickel plated, permanently self lubricating design that exceeds ANSI/BHMA Grade 2 standards, this 200 Series hinge is built for active residential and commercial cabinets. For projects needing a free swinging full overlay hinge that also works with Smove soft-close door devices, this Salice 200 Series hinge offers a consistent spec across multiple cabinet types.