Nickel Concealed Hinge Built for Flush Inset Doors

This Salice Series 200 hinge is a screw-on, self-close concealed hinge sized for inset doors on face-frame and frameless cabinets, finished in nickel.

Key Features

• Inset door geometry sets the door flush inside the cabinet opening with an even reveal on all sides.
• Self-close spring pulls the door shut over the last few degrees of travel.
• 110 degree opening delivers standard everyday access on an inset-mounted door.
• Screw-on mounting fastens the hinge directly to the cabinet without clip hardware.
• Height and side adjustment lets you dial in an even reveal after the door is hung.
• Works on both face-frame and frameless cabinets when paired with the matching Salice base plate.

Where Inset Geometry Earns Its Place

Inset doors sit inside the cabinet opening rather than over it, so the fit is inherently tighter and the reveal on all four edges has to be consistent. This hinge is built for that application. The 35mm cup bores into the back of the door, and the arm connects to a Salice base plate mounted to the cabinet, ordered separately. On a face-frame cabinet, the plate picks up the stile; on a frameless box it mounts to the side panel. Either way, the hinge arm's full crank carries the door into the inset position so it sits flush rather than overlapping.

The self-close spring draws the door shut from a few degrees open. This keeps a closely fitted inset door from sitting ajar and avoids the friction a slamming close puts on a tight gap. Because the spring closes rather than cushions, a steady, deliberate push is what produces the cleanest settle. For a damped, quiet close, the Silentia+ soft-close version of this series is the alternative to specify.

Steel Build in a Nickel Finish

The hinge is plated steel with a nickel finish. Nickel is a neutral, mid-toned finish that reads as clean and consistent alongside other cabinet hardware, which matters on an inset application where the slight reveal around the door keeps the hinge visible even when closed. The screw-on mount is a direct, mechanical connection to the cabinet, and the height and side adjustment lets you bring doors back to a true reveal as the case settles over time.

Right for Builders Who Fit Inset Work

This hinge suits cabinet shops, furniture builders, and custom installers who fit inset doors as a regular part of the work. It runs on both face-frame and frameless construction, so a single SKU covers different cabinet types on the same job. Inset work calls for tighter tolerances than overlay, so the adjustment range pays off in shops where doors are fitted by hand and fine-tuned at install. The Series 200 is Salice's working value line, reliable for production runs and remodel jobs alike.

Common Questions

A Consistent Reveal, Done in Nickel

When the design calls for flush inset doors that close on their own and hold a clean reveal, this hinge delivers the geometry and the finish to make both work.