Salice 200 Series Hinge For Cabinet Doors

Salice 200 Series hinge is a concealed cabinet hinge that lets face-frame and frameless cabinet doors swing on a 110 degree opening, giving doors full motion for everyday access while keeping hardware out of sight when closed. This hinge is a free swinging version, so the door moves smoothly with no self-closing action, which suits applications where controlled or assisted closing is not required. The hinge is a half overlay design, so a single door shares a cabinet opening with another door or frame, supporting typical kitchen and commercial layouts. An all steel hinge body provides a solid mechanical connection between door and cabinet, which matters on heavily used installations. The nickel plated finish adds corrosion resistance, helping the hinge stand up in normal residential and commercial cabinet environments over years of use.

Key Salice 200 Series Details That Matter

• The 110 degree opening angle lets the door swing well past straight out, giving easier access to the cabinet interior and reducing interference when loading wider items across the opening.
• The 11 mm cup depth allows the hinge to fit most cabinet door profiles, so a wide range of common door thicknesses and edge details can be used without reworking the panel for deeper hardware.
• The hinge cup edge drilling distance range of 3 mm to 6 mm offers flexibility in boring location, which helps match existing shop setups and jigs while still hitting the correct reveal and overlay.
• The patented parallel side-to-side adjustment range of plus 4.5 mm to minus 1.5 mm lets the installer fine-tune door alignment, which reduces time spent tweaking gaps and straightening reveals across a run.
• The permanently self lubricating design uses environmentally safe lubricants inside the hinge, so the motion remains smooth over years of cycling and reduces the need for external lubrication in service.

Salice Screw-On Cup Mounting And Fit

This Salice screw-on hinge cup fastens with two #6 x 5/8 inch screws, so the cup anchors directly into the door with a familiar screw size that many shops already stock. That direct fastening gives a positive hold in the bore, which is important when doors carry weight or are handled frequently. The hinge is a concealed cabinet style, so once installed on face-frame or frameless construction, the arm and cup sit inside the cabinet envelope and keep the exterior lines clean. Series 200 hinges are designed for both residential and commercial cabinets, so the same hinge specification can be carried across kitchen runs, office storage, or institutional casework for consistent drilling patterns and adjustments.

Using This Salice 200 Hinge In Real Projects

Where This Half Overlay Hinge Fits Best

This Salice free swinging hinge is intended for half overlay applications on both face-frame and frameless cabinets, giving flexibility across different construction methods in the same project. In a face-frame layout, the half overlay geometry lets a pair of doors cover a single opening, which is common on wider cabinet bays where two doors meet near the center stile or frame. On frameless cabinets, the same half overlay behavior allows a door to share side panel coverage, which helps standardize boring patterns in euro-style casework. Series 200 hinges are designed for use in both residential and commercial cabinets, so they suit kitchens, break rooms, storage cabinets, and other casework where a concealed hinge is preferred. The hinge is compatible with Smove soft-close door devices, so when a soft-close unit is added, the same hinge can support damped closing while retaining the existing cup and arm geometry.

Adjustment, Performance, And Certification Details

The patented parallel side-to-side adjustment from plus 4.5 mm to minus 1.5 mm is controlled by a hinge arm screw, so lateral reveals can be dialed in after mounting without re-boring holes. That adjustment range helps straighten door gaps across long cabinet runs, which reduces rework when frames or boxes vary slightly. The hinge has a cup depth of only 11 mm and a 3 mm to 6 mm cup edge drilling distance, so standard 35 mm boring setups can be used while still accommodating different overlays and profiles. Series 200 hinges exceed ANSI/BHMA Grade 2 standards, which signals that the hinge has been tested to a recognized performance level for typical cabinet duty. The product also meets ISO9001 and ISO14001 environmental certifications, indicating that manufacturing and environmental management follow established systems. Salice states that Series 200 hinges have a lifetime warranty, which reflects the design intent for long-term cabinet service when the hinge is applied within its typical residential and commercial use.

Common Questions About Salice C2P4G99 Hinges

Choose This Salice Hinge For Consistent Cabinet Fit

The Salice 200 Series hinge with 110 degree opening, half overlay geometry, and screw-on cup offers a proven concealed solution for both residential and commercial cabinets. Its parallel side-to-side adjustment, 11 mm cup depth, and 3 mm to 6 mm drilling distance streamline layout and alignment across different runs. With an all steel, nickel plated, permanently self lubricating design that exceeds ANSI/BHMA Grade 2 standards and meets ISO9001 and ISO14001 certifications, this hinge is built for long-term cabinet service. Select the Salice C2P4G99 hinge when a free swinging, half overlay concealed hinge is required across face-frame and frameless projects.