Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice 200 Series Rapido hinge mounts full overlay doors on frameless and face-frame cabinets, with a self-close spring and expanding-dowel plate attachment in a nickel finish.
Full overlay means the door covers the cabinet side from edge to edge, with only a narrow gap between adjacent doors. This hinge is engineered for that geometry on both frameless and face-frame construction. The 35mm cup bores into the back of the door, and the arm connects to a Salice base plate mounted to the cabinet side or face-frame stile. That plate is sold separately and should be matched to a Salice plate in this series. The expanding dowel on the plate drives into a bored hole in the cabinet for a solid mechanical anchor, a step up from screws alone on production work where plate pull-out is a concern.
The hinge body is steel with a nickel plating. Nickel reads as a warm neutral that pairs naturally with satin nickel pulls, knobs, and slide hardware on the same cabinetry. It holds its appearance better than raw zinc in high-humidity environments like kitchens and baths, though this hinge is sized for indoor cabinetry. The self-close spring is mechanical and straightforward: it draws the door home over the last several degrees and holds it there. There is no damper in this hinge, so the close is firm rather than cushioned.
This is a working-rate hinge for shops, contractors, and remodelers running full overlay doors at volume on either cabinet construction type. The 45mm boring pattern matches standard production boring, and the 35mm cup fits the door prep most shops are already running. The expanding dowel attachment suits production environments where plates need a repeatable, secure connection without depending on screw torque alone. Homeowners replacing worn hinges on an existing full overlay cabinet will find the geometry and boring straightforward to match. For a cushioned, quiet close on the same full overlay application, the Silentia+ soft-close version of this series is the comparison to consider.
No. The base plate mounts to the cabinet and the hinge arm connects to it, but the plate is a separate purchase. Use a Salice plate matched to this series and your cabinet construction. Plates from other brands will not connect to this hinge.
This hinge is self-close: a spring pulls the door shut over the last few degrees of travel. Soft-close uses a damper to slow the door so it settles quietly. This hinge closes firmly rather than cushioning the close. For soft-close on full overlay doors in this series, look at the Silentia+ version.
The expanding dowel is on the base plate, not the hinge itself. It anchors the plate into a bored hole in the cabinet side for a mechanical hold. It is an alternative to a screw-only plate attachment and is common in production cabinetry where a firm, repeatable connection matters.
Yes. This hinge is rated for both frameless and face-frame cabinets. Match the Salice plate to your cabinet type when you order the plate separately.
Specify this hinge when a job calls for full overlay doors that close reliably on their own, with a nickel finish that ties together across every piece of hardware on the cabinet.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  UBS2A637XF Mfr# S2A637XF | 94˚ Opening Angle Reduction Clip, Nickel-Plated |
