Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 concealed hinge hangs inset doors on both face-frame and frameless cabinets, with a free-swinging action and a nickel finish that disappears behind the door when closed.
An inset door sits inside the cabinet opening rather than over it, framed by a tight, even gap on all sides. This hinge carries the full-crank arm geometry that positions a door exactly in that flush plane and lets it swing to 110 degrees. The 35mm cup bores into the back of the door and the arm connects to a Salice base plate mounted on the cabinet side or stile, sold separately. Because this is a free-swinging hinge, the door holds any open position without a spring pulling it closed. That behavior pairs naturally with push-to-open hardware or any application where automatic closing is not wanted.
The hinge is plated steel in a nickel finish. On an inset door the hinge stays fully hidden when the door is closed, so the finish is a practical matter rather than a decorative one: it resists minor corrosion and keeps its appearance through repeated adjustments at the cam screws. The side and height adjustment built into the arm lets you bring doors back to an even reveal as the cabinet settles over time without removing the hinge.
Reach for this hinge when the design calls for flush inset doors and the closing action will be handled by a separate catch, magnet, or push-to-open mechanism rather than a built-in spring or damper. It works on frameless boxes with pre-bored 5mm system holes and on face-frame cabinets where the plate screws to the stile. Cabinet shops fitting handle-less inset fronts and builders running push-to-open inset kitchens are the natural audience. For a door that needs to pull itself closed, the self-close version of this series is the better choice; for a cushioned, quiet settle, look to the Silentia+ soft-close series instead.
Yes. This hinge body bores into the door and clips to a base plate mounted on the cabinet. The plate is sold separately. Use a Salice plate matched to your cabinet construction, as plates are brand-specific and will not interchange with other brands.
The door will not close on its own. It stays at whatever position you leave it. For a closed cabinet you will need a magnetic catch, a push-to-open latch, or similar hardware to hold the door shut.
No. This hinge is built for inset doors only, where the door sits flush inside the opening. For a door that covers the cabinet side, an overlay hinge with the correct arm crank is the right choice.
No. The screw-on plate fastens with wood screws rather than pressing into 5mm system holes, so it works on cabinets that are not built on the 32mm system.
When the goal is a clean inset reveal with no automatic closing, this hinge provides the geometry, the adjustment range, and the screw-on simplicity to get there on either cabinet type.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3000 Each |  UBS2XX85H9 Mfr# S2XX85H9 | Flange Cover Cap, Nickel | ||||
Sold in: 1 Each |  UBS2A637XF Mfr# S2A637XF | Salice 94° Hinge Stop Device for Series 200 Hinges S2A637XF | ||||
Sold in: 1 Each |  UBS2XX83A1 Mfr# S2XX83A1 | Hinge Arm Cover Caps White with No Logo | ||||
Sold in: 1 Each |  UBS2XX83A3 Mfr# S2XX83A3 | Plain Cover Cap for Hinge Arm, Black | ||||
Sold in: 1 Each |  UBC2P6P99 Mfr# C2P6P99 | Salice Series 200 110° Inset Hinge Self-Closing Screw-On 2P6P99 | ||||
Sold in: 1 Each |  UBC2R6P99 Mfr# C2R6P99 | Salice Series 200 110° Inset Hinge Self-Closing Dowel Mount C2R6P99 | ||||
Sold in: 1 Each |  UBC276P99 Mfr# C276P99 | Salice Series 200 110° Inset Hinge Self-Closing Rapido C276P99 | ||||
Sold in: 1 Each |  UBC2J6P99 Mfr# C2J6P99 | Salice Series 200 110° Inset Hinge Self-Closing Logica C2J6P99 |
