Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2 inch diameter 6 inch furniture leg describes this Como Series cabinet leg from Camar, giving installers a clearly defined size for planning base cabinet or work surface height. The 6 inch high design establishes a stable starting elevation that suits many cabinet and table layouts where moderate clearance under the unit is required. Being part of Peter Meier's Como Series links this leg to a premium line of steel cabinet legs, so you can match it with other legs from the same family on multi-unit runs. The leg is classified under work surface and tables in equipment and furniture legs, aligning it with applications where consistent support and level alignment are priorities. With a metal cabinet leg specified as alumina finish, the leg presents a neutral metallic look that coordinates with a wide range of casework and commercial interiors.
A 1-1/8 inch adjustable black plastic foot on this Como Series leg gives installers a defined range for leveling cabinets or tables, which is useful when dealing with floors that are out of level across a run. The leg is supplied as a 2 inch diameter steel body mated with this adjustable foot, so height changes happen at the base while the visible section of the leg remains consistent. A 3 inch square mounting plate is specified with the cabinet leg, establishing a fixed interface size between the leg and the cabinet or table bottom. That square plate form factor helps installers plan screw locations around edge distances, providing a known bearing area where loads transfer from casework into the steel leg.
This Como furniture leg from Camar is categorized under work surface and tables, tying it directly to applications such as cabinet bases, utility tables, and similar furniture needing defined clearance. The steel construction specified for all cabinet legs in the series supports use under heavier tops or storage cabinets where capacity matters. With a 6 inch high compacted height, this leg serves well where designers want a visible, proportionate leg height without pushing work surfaces too high. The alumina finish keeps the appearance neutral, allowing the leg to sit under commercial casework, shop fixtures, or residential cabinets without drawing focus away from fronts and tops. Because Peter Meier's Como Series is identified as a premium line of steel cabinet legs, specifiers can confidently match this model with other heights from the same series when mixing 4 inch, 6 inch, 8 inch, and 10 inch compacted leg options across a project.
The 2 inch diameter on this metal cabinet leg creates a predictable bearing area against the floor and under the cabinet, which contributes to repeatable stability when legs are laid out in regular patterns. A 1-1/8 inch adjustable black plastic foot gives measurable play for fine-tuning elevation, so installers can align multiple legs to match a continuous countertop or work surface without shimming the cabinet bottom. The 3 inch square mounting plate provides a consistent attachment footprint, simplifying layout when drilling pilot holes on a batch of cabinets or tables, since the same plate size repeats on each unit. With a weight capacity per leg of 660 lbs, designers can calculate total support capacity by leg count, improving planning for heavy work surfaces, equipment stands, or storage pieces. All cabinet legs in the series are made of steel, which keeps performance characteristics consistent when combining different heights on the same installation run.
The Como furniture leg is 6 inches high, so it sets a mid-height base that suits cabinets or tables where moderate clearance and comfortable working elevation are desired.
This metal cabinet leg has a weight capacity of 660 lbs per leg, which allows it to support heavier cabinets, work surfaces, or equipment stands when used in adequate numbers.
The cabinet leg has a 1-1/8 inch adjustable black plastic foot, giving installers measurable height flexibility for leveling runs on uneven floors while keeping the main steel body position consistent.
The 3 inch square mounting plate defines a fixed attachment footprint on the cabinet bottom, helping installers position holes and distribute weight evenly across the leg connection area.
All cabinet legs in the Como Series are made of steel, so this 2 inch diameter leg delivers consistent strength characteristics for load-bearing cabinet and table projects.
The metal cabinet leg uses an alumina finish, giving it a neutral metallic look that coordinates easily with various cabinet hardware and surface colors in both commercial and residential settings.
The 552-15-AO furniture leg brings together a 2 inch diameter steel body, 6 inch high compacted leg, and 1-1/8 inch adjustable foot, aligning well with work surface and tables projects that demand accurate height control. The 660 lbs per leg weight capacity supports use under heavier casework or equipment while preserving an alumina finish suited to exposed installations. When a project calls for equipment and furniture legs with defined dimensions and a 3 inch square mounting plate interface, this Camar Como furniture leg from Wurth Baer Supply offers a clear, spec-driven choice for repeatable layouts.
Sold In: 1 Each
