Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Elevate brushed nickel knob provides a square 1-9/16 inch length and 1-9/16 inch width profile that gives cabinet doors and drawer fronts a consistent, modern footprint. The aluminum construction creates a lightweight pull point that feels solid in everyday use. The brushed nickel finish delivers a muted metallic look that pairs cleanly with many laminate and wood tones across a shop or jobsite. A 1-1/8 inch projection sets the knob out from the face, so fingers clear the door or drawer edge without crowding the hand. The Elevate collection identity helps keep hardware selections uniform across a project when matching other Berenson Elevate pieces. The defined measurements let installers plan hole locations and layout before drilling, which supports accurate, repeatable hardware alignment.
The Elevate knob length of 1-9/16 inch and width of 1-9/16 inch give a square outline that simplifies marking centerlines for drilling through cabinet doors or drawer fronts. The 1-1/8 inch projection positions the gripping surface away from the cabinet face, so the installer can set the knob where fingers naturally reach without the hand scraping finished surfaces. The specified 8-32 x 1 inch screw size ties directly into common cabinet construction thicknesses, allowing a straightforward through-bore and tightening process from the back side of the panel. With these defined dimensions, an installer can repeat hole spacing and knob height across a full run of cabinetry, supporting uniform alignment and a clean finished appearance.
This Berenson Elevate series knob is classified under decorative hardware and moldings in the knobs category, so it is suited to door and drawer fronts where appearance and function both matter. The aluminum material keeps the overall weight of each front lower, which is useful on smaller drawer boxes or lighter cabinet doors. The brushed nickel finish ties into other brushed nickel elements in a room, such as hinges or pulls from the same Elevate collection, helping maintain a coordinated hardware look on casework. With its 1-9/16 inch by 1-9/16 inch square profile, the knob provides a substantial target for the hand on wider drawers, while still fitting comfortably on narrow door rails. The projection of 1-1/8 inch also means the knob stands off the face enough that door panels can be operated without contact from knuckles, which supports smooth movement in tight kitchen or shop layouts.
The manufacturer part number 2095-4BPN-P identifies this exact Elevate series brushed nickel knob, which helps installers and shops match existing hardware on add-on cabinets or replacement fronts. Its defined 1-9/16 inch length and width provide a repeatable reference point when laying out jigs or templates for drilling, allowing fast replication across multiple cabinets. The 1-1/8 inch projection offers a predictable stand-off distance, so designers can account for clearance near adjacent walls, appliance panels, or tall face frames. The specified 8-32 x 1 inch screw size means thread engagement and bore sizing are known in advance, streamlining preparation during shop fabrication or onsite installation. Because the knob belongs to the Berenson Elevate collection, it can be selected as part of a hardware schedule where matching pulls and knobs share a common brushed nickel appearance and design language, supporting coherent visual lines in finished cabinetry.
The Berenson Elevate knob measures 1-9/16 inch in length and 1-9/16 inch in width, with a 1-1/8 inch projection, giving a square profile and consistent stand-off for cabinet doors and drawers.
The Elevate series knob is made from aluminum, providing a light yet solid-feeling pull point that is suitable for regular cabinet door and drawer operation.
The 2095-4BPN-P Elevate knob has a brushed nickel finish, offering a muted metallic look that coordinates with other brushed nickel decorative hardware and moldings.
The Berenson Elevate cabinet knob is specified for use with an 8-32 x 1 inch screw size, aligning with common cabinet drilling and fastening practices.
The brushed nickel Elevate knob has a projection of 1-1/8 inch, so the gripping surface stands off the cabinet face enough for comfortable finger clearance.
The Berenson 2095-4BPN-P knob belongs to the Elevate collection, helping projects keep a consistent design theme across decorative hardware selections.
The Berenson Elevate brushed nickel knob combines a 1-9/16 inch square footprint, 1-1/8 inch projection, and aluminum construction to support dependable cabinet operation. The defined 8-32 x 1 inch screw size and Elevate collection identity make it straightforward to integrate into planned hardware schedules. For projects that call for a brushed nickel decorative knob with clear dimensions and a square profile, this Berenson 2095-4BPN-P part provides a consistent, layout-friendly option for both new installations and coordinated updates.
Sold In: 1 Each
