Berenson Elevate Series 3-3/4" (95 mm) Center to Center Satin Gold Pull, - 2102-40SG-P

Elevate Pull 96mm CC Satin Gold For Cabinets

Elevate Pull 96mm CC Satin Gold is a Berenson Elevate Series aluminum cabinet pull in a contemporary style, so it gives doors and drawers a modern, streamlined look that matches current casework lines. The 3-3/4 inch (95 mm) center to center dimension sets consistent handle spacing across a run, which keeps layouts looking straight and professional from cabinet to cabinet. The pull length of 4-5/16 inches leaves finger room beyond the mounting holes, which helps users grab and operate heavier drawers without knuckles hitting the front. A projection of 1-1/8 inches stands the pull off the surface, giving room for a comfortable grip while still staying tight to the face for a cleaner profile. The satin gold finish provides a muted metallic tone, which fits well in jobs calling for warm finishes without a mirror shine.

Key Elevate Pull Details That Help Your Job

• The aluminum material keeps the pull light, which reduces stress on smaller cabinet doors and drawer fronts while still giving a metal feel that suits most residential and commercial installations.
• The satin gold finish presents a soft sheen, which helps hide fingerprints and minor smudges during handling so the hardware maintains a clean look after installation.
• The contemporary style aligns with modern and transitional cabinet designs, which supports consistent visual lines when used across full kitchens, baths, or office casework.
• The 3-3/4 inch center to center measurement matches a common drilling pattern, which helps with straightforward layout using standard jigs and speeds repetition on multi-cabinet runs.
• The 9/16 inch base diameter ties the pull footprint to a compact contact area, which focuses pressure near the mounting points for solid seating against the cabinet face.
• The 3/4 inch width gives the pull a slim front profile, which keeps the hardware from visually crowding narrow rails or small drawer fronts.

Installation Dimensions For Consistent Cabinet Fit

The 3-3/4 inch (95 mm) center to center spacing sets the drilling distance for this pull, which lets installers line up holes accurately across doors and drawers. The stated 8-32 x 1 inch screw size defines the fastener thread and length used, which coordinates with standard cabinet pull drilling so mounting remains familiar on site. A pull length of 4-5/16 inches defines the overall bar reach, which helps with planning clearances near adjacent pulls or obstacles. The 1-1/8 inch projection fixes how far the pull stands off the surface, which aids in planning for door swing clearances against walls or tall cabinets.

Using This Berenson Elevate Pull In Projects

Where This Contemporary Cabinet Pull Works Best

This Berenson Elevate Series pull sits in the Handles and Pulls, Berenson class, which positions it for use wherever decorative cabinet hardware is specified. The satin gold finish suits interior woodworking projects where a warm metallic accent is part of the design, which helps tie together door, drawer, and appliance panel fronts. With a 3-3/4 inch center to center and 4-5/16 inch overall length, this pull fits well on typical kitchen and vanity fronts, which supports consistent sizing between base and wall cabinets. The 3/4 inch width keeps the profile narrow, which fits on slimmer rails or smaller drawer faces that cannot carry wider hardware.

Details That Support Repeatable Layout And Results

The precise 3-3/4 inch (95 mm) center to center dimension on this cabinet pull allows jigs or drilling templates to stay set for repetitive installation, which reduces layout time across large banks of cabinets. Its 1-1/8 inch projection holds the gripping surface off the face enough for a comfortable handhold, which can improve day-to-day usability on frequently used drawers. The 9/16 inch base diameter concentrates contact at the mounting points, which supports a snug, flush fit against the cabinet surface. The identified 8-32 x 1 inch screw size aligns with typical cabinet hardware practice, which keeps fastening predictable when working through standard panel thicknesses. The aluminum construction controls overall handle weight, which is useful on lighter doors where minimizing front load can matter for hinge performance.

Common Questions About The Elevate Satin Gold Pull

Choose This Pull For Contemporary Satin Gold Jobs

The Berenson Elevate Series 3-3/4 inch center to center satin gold pull combines aluminum construction, contemporary styling, and defined dimensions that suit repetitive cabinet work. Using the 4-5/16 inch length, 1-1/8 inch projection, and 3/4 inch width, layouts can be planned confidently across doors and drawers. The specified 8-32 x 1 inch screw size and 9/16 inch base diameter keep mounting details clear, which supports efficient installation. For projects calling for a satin gold cabinet pull with this exact 96 mm center to center, this model aligns closely with those requirements.