Berenson Elevate Series 6-5/16" (160 mm) Center to Center Graphite Pull, - 2111-4GPH-P

Berenson Elevate Graphite Pull For Cabinets

Berenson Elevate graphite pull gives cabinets a contemporary handle that matches modern jobs. This aluminum pull from the Elevate Collection is built as a cabinet handle with a 6-5/16 inch center to center layout, so hole spacing matches the spec. The 6-13/16 inch overall length provides a substantial hand grip along the cabinet front, which helps users grab and operate doors and drawers comfortably. A graphite finish delivers a dark, modern look on the aluminum body, so the pull reads clean on painted or laminate fronts. The 3/4 inch width offers a balanced feel across the rail or stile without crowding narrow faces. A projection of 1-1/8 inch sets the pull off the surface far enough for finger clearance, helping reduce knuckle bumps during everyday use. Berenson Elevate style keeps the lines consistent across contemporary cabinet runs.

Key Elevate Pull Details For Cabinet Projects

• The Elevate Collection and contemporary style define a modern design language, so this pull supports straight-line cabinet layouts where a clean, updated look is required across multiple fronts.
• The 6-5/16 inch (160 mm) center to center dimension sets precise hole spacing, which matters when drilling new fronts or aligning with existing 160 mm boring patterns on replacement doors and drawer fronts.
• The overall 6-13/16 inch length gives a generous gripping area, so hands can catch the pull easily on wider drawers and doors, improving day-to-day handling on kitchen, bath, or shop storage cabinets.
• The 1-1/8 inch projection creates a consistent stand-off from the cabinet surface, giving enough space for fingers behind the pull while keeping the handle low-profile along walk-by zones on base cabinets.
• The 3/4 inch width and 9/16 inch base diameter distribute contact along the rail, helping the pull sit visually proportionate on standard face frames and slab fronts without looking oversized.
• The aluminum material keeps the pull lightweight while supporting a solid-feeling grip, which is useful on multiple-drawer runs where hardware weight can add up across an installation.
• The graphite finish provides a dark tone that contrasts lighter surfaces, so installers can use it as a visual accent line across banks of cabinetry and built-ins.

Installation Dimensions And Mounting Fit

This Elevate Series 160 mm pull is designed around a 6-5/16 inch center to center mounting distance, which sets exact hole locations for drilling jigs and shop templates. With a 6-13/16 inch overall length, the pull reaches slightly past the bore points, giving coverage that helps visually center the handle on common drawer and door widths. The 1-1/8 inch projection defines how far the pull stands off the face, which is important when planning clearances near adjacent walls or tall cabinet gables. A 3/4 inch width and 9/16 inch base diameter guide placement relative to frame edges, so the pull lands consistently on stiles and rails. The 8-32 x 1 inch screw size specification sets the thread and length spec for through-bore fastening into standard cabinet fronts.

Using This 160 mm Pull In Cabinet Runs

Where The Berenson Elevate Pull Works Best

The Berenson Elevate Series 6-5/16 inch center to center graphite pull is suited to installations calling for a contemporary cabinet handle with a defined 160 mm boring pattern. Because the pull length is 6-13/16 inch, it pairs well with medium to wider cabinet doors and drawers, giving a visual span that fits standard kitchen and bath cabinet widths. The aluminum material keeps the pull appropriate for high-count layouts such as long drawer banks, as the hardware does not add excessive weight along the fronts. Its graphite finish supports projects that specify darker decorative hardware against lighter casework, so the pull can act as a consistent design line across uppers and lowers. Within decorative hardware and moldings projects classified as handles and pulls, this piece fills the role of a straight, modern cabinet pull from Berenson Corporation.

Details That Support Consistent Cabinet Results

The Elevate Collection and contemporary style designation give installers a clear design reference, which simplifies matching this pull to other Berenson handles and pulls on the same job. The 6-5/16 inch (160 mm) center to center measurement provides a repeatable drilling dimension, reducing layout variation when using boring machines or templates on multiple fronts. Its 1-1/8 inch projection keeps door and drawer faces easy to grasp while maintaining a slim profile, helping align aesthetics with practical finger clearance. The 3/4 inch width and 9/16 inch base diameter define the footprint against the cabinet surface, so each pull seats consistently and reads uniform across a bank. The aluminum construction supports a solid, rigid feel in daily use, helping the pull function reliably as part of frequently used cabinet hardware. The graphite finish keeps the color tone consistent from pull to pull, which is important when lining up hardware on continuous runs of casework.

Common Questions About This Elevate Cabinet Pull

Select This Pull For Contemporary Cabinet Runs

The Berenson Elevate Series 6-5/16 inch center to center graphite pull brings a contemporary aluminum handle with defined 160 mm spacing to cabinet projects. With its 6-13/16 inch length, 1-1/8 inch projection, and 3/4 inch width, this pull supports consistent layouts on doors and drawers. The graphite finish and Elevate Collection styling align with modern decorative hardware and moldings work. For projects calling for a straight, contemporary cabinet pull from Berenson Corporation, this model 2111-4GPH-P fits that role across kitchen, bath, and storage cabinetry.