Berenson Elevate Series 3-3/4" (95 mm) Center to Center Matte Black Pull, - 2116-4055-P

Berenson Elevate Matte Black Pull For Cabinets

Berenson Elevate matte black pull gives cabinets a contemporary aluminum handle with a 3-3/4 inch (95 mm) center to center drilling, so it fits common door and drawer layouts on many jobs. The matte black finish provides a dark, uniform appearance that suits modern kitchens, baths, and casework where a clean visual line matters. Aluminum construction keeps the pull light while still providing a solid gripping surface for frequent opening and closing. The pull length of 4-5/16 inches offers hand room around the 1-1/8 inch projection, helping users grab from different angles on doors and drawers. A base diameter of 9/16 inch and a width of 3/4 inch give the pull a defined footprint on the face, which helps cover previous screw marks when upgrading existing fronts.

Key Details That Support Cabinet Work

• The 3-3/4 inch (95 mm) center to center measurement sets consistent drilling for doors and drawers, which speeds layout when repeating the same pull across a full run of cabinets.
• The overall 4-5/16 inch length provides extra grip area beyond the mounting points, which helps on wider drawer fronts or heavier cabinet doors that benefit from a fuller handhold.
• The 1-1/8 inch projection creates finger clearance between the pull and the cabinet face, which reduces knuckle contact on thicker door profiles or applied moldings.
• The 3/4 inch width and 9/16 inch base diameter create a balanced front view, which helps the pull sit visually proportional on both narrow doors and wider drawers.
• The matte black finish and contemporary Elevate collection styling deliver a consistent look, which simplifies matching hardware across multiple rooms or cabinet runs.
• The aluminum material keeps weight down on the cabinet front, which is useful on lighter doors or thinner drawer faces that still need a sturdy-feeling pull.

Mounting And Sizing Details For Installation

The 3-3/4 inch (95 mm) center to center drilling defines the hole spacing, so installers can align this pull with standard jigs for repetitive cabinet work. With a 4-5/16 inch overall length, the pull slightly overhangs the drilling span, giving visual coverage at each end of the mounting line. The 1-1/8 inch projection sets the standoff from the face, providing room for fingers without pulling the hardware too far out from the cabinet. A 3/4 inch width and 9/16 inch base diameter give the installer a clear visual edge to reference when aligning the pull parallel to door or drawer edges during layout.

Using This Elevate Series Pull On Projects

Where This 3-3/4 Inch Pull Fits Best

This Berenson Elevate Series pull is specified as a 3-3/4 inch (95 mm) center to center cabinet handle, so it suits cabinet doors and drawers drilled on that common spacing in kitchens, baths, and built-ins. The contemporary style from the Elevate collection pairs with modern or streamlined fronts, helping projects stay consistent when multiple cabinet configurations share the same hardware line. Its 4-5/16 inch overall length works well on standard-width drawer faces and average cabinet doors, giving enough presence without overpowering smaller fronts. The matte black finish suits darker finishes and also contrasts cleanly against light-colored doors, supporting both matching and contrasting design approaches on the same job.

Details That Help Achieve Repeatable Results

The defined 3-3/4 inch (95 mm) center to center dimension lets installers rely on fixed drilling patterns, which supports repeatable results across long cabinet runs and reduces layout time. The 1-1/8 inch projection keeps a consistent stand-off, helping doors and drawers feel uniform when gripped along a bank of cabinets. With a 3/4 inch width and 9/16 inch base diameter, the pull offers clear visual edges, making it easier to align square to stile edges or drawer tops by eye or with simple gauges. The matte black finish provides an even, low-sheen surface that hides minor fingerprints and visually ties together multiple cabinet sections. Aluminum construction keeps the pull light, which is useful on large doors or wide drawers where multiple pulls are used and total front weight adds up across the installation.

Common Questions About This Cabinet Pull

Choose This Pull For 96mm Cabinet Layouts

The Berenson Elevate matte black pull with 3-3/4 inch (95 mm) center to center spacing provides a contemporary aluminum handle sized for standard cabinet drilling. Its 4-5/16 inch length, 1-1/8 inch projection, and 3/4 inch width give practical grip and coverage on doors and drawers. For projects planned around the Elevate collection and a matte black finish, this pull offers consistent dimensions that support clean layouts across multiple cabinets.