Berenson Elevate Series 6-5/16" (160 mm) Center to Center Verona Bronze Pull, - 2090-40VB-P

Berenson Elevate Pull 160mm For Cabinet Use

Berenson Elevate pull 160mm center to center describes a cabinet handle from the Elevate collection designed for projects that call for a 6-5/16 inch (160 mm) drilling pattern. This aluminum pull in a Verona Bronze finish provides a defined, consistent gripping point along the length, helping doors and drawers open with a controlled handhold. The 6-13/16 inch overall length gives extra bar beyond the mounting holes, which helps cover previous install marks when changing handles on existing cabinetry. A 3/4 inch width gives a substantial front face to grab, supporting a firm grip when hands are dusty or gloved. The 1-1/8 inch projection sets the handle off the front of the cabinet enough for fingers to wrap behind, which helps reduce knuckle contact with the door surface during regular use.

Key Pull Details That Support Cabinet Work

• The Elevate collection identity ties this pull to a known Berenson decorative hardware series, which helps match new installations with other Elevate handles on the same cabinet run.
• The aluminum construction keeps the pull lightweight, which is useful on smaller doors and drawers where reduced hardware weight supports smooth operation over time.
• The Verona Bronze finish establishes a warm, darker tone on the cabinet face, which helps coordinate with bronze-toned hinges or fixtures in the same workspace.
• The 6-13/16 inch overall length gives a longer handhold than the drilling size alone, allowing users to grip closer to the door edge or further inboard as layout demands.
• The 3/4 inch width presents a broad contact surface, which supports comfortable pulling force on heavier drawers or storage fronts.
• The 1-1/8 inch projection spaces the bar out from the front, creating finger clearance that helps users pull straight without scraping against the cabinet surface.

Cabinet Pull Mounting Dimensions And Fit

The 6-5/16 inch center to center dimension defines the mounting hole spacing for this pull, aligning with layouts drilled on a 160 mm pattern. That spacing supports use on many cabinet widths where a mid-size handle is appropriate. The 6-13/16 inch overall length means the bar extends beyond the screw points at both ends, which helps visually balance wider drawer fronts. With a 3/4 inch width, the pull covers a modest strip of the cabinet face, which helps mask minor surface blemishes around the mounting area. The 1-1/8 inch projection determines how far the pull stands off the door or drawer, which affects how easily fingers slide behind the bar in everyday use.

How This Verona Bronze Pull Works In Practice

Where This Berenson Elevate Pull Fits Best

This Elevate Series 6-5/16 inch center to center Verona Bronze pull fits cabinet layouts that follow a 160 mm drilling standard, which supports cabinet runs using metric hole spacing. The 6-13/16 inch overall length suits mid-size doors and drawers where a handle needs presence without dominating the front. Its 3/4 inch width gives enough visual weight for kitchen, bath, or shop cabinetry in designs that call for a clean bar profile. The Verona Bronze finish places a bronze tone across the front of each door or drawer, which works well where hardware is expected to coordinate with bronze-colored faucets, lighting, or hinges. Because the pull is part of the Elevate collection, it supports projects that use multiple Elevate pieces to carry one design across upper cabinets, base cabinets, and utility storage.

Details That Support Repeatable Cabinet Results

The defined 6-5/16 inch (160 mm) center to center measurement supports repeatable drilling on jigs set to that spacing, which helps speed through-door and through-drawer layout on production or multi-cabinet jobs. The 6-13/16 inch overall length provides a consistent edge-to-edge dimension to reference when aligning handles across several fronts, supporting straight sight lines along the run. A 3/4 inch width offers a clear edge for setting reveals relative to panel edges or rail profiles, which helps maintain even visual spacing cabinet to cabinet. The 1-1/8 inch projection provides uniform stand-off, which keeps finger clearance consistent as hardware is repeated along tall pantry doors or wide drawer stacks. The aluminum material means each pull has modest mass, helping reduce added load on drawer slides and door hinges when many units are installed throughout a project.

Common Questions About This Berenson Cabinet Pull

Select This Pull For 160mm Cabinet Layouts

The Berenson Elevate Series 6-5/16 inch (160 mm) center to center Verona Bronze pull provides a defined drilling pattern, a 6-13/16 inch overall length, and a 1-1/8 inch projection in aluminum. Those dimensions support straightforward cabinet layout where a bronze-finished handle with a 3/4 inch wide grip is needed across doors and drawers. For projects calling for Elevate collection styling and 160 mm spacing, this pull lines up cleanly with typical cabinet hardware drilling and visual alignment goals.