Berenson Elevate Series 10-1/16" (256 mm) Center to Center Brushed Nickel Pull, - 2091-4BPN-P

Berenson Elevate Brushed Nickel Pull For Cabinets

Berenson Elevate brushed nickel pull is an aluminum cabinet handle designed for jobs that call for a 10-1/16 inch center to center layout. The specific 256 mm center to center spacing sets consistent drilling positions, which helps installers line up multiple doors and drawers across a run. The overall 10-5/8 inch length gives this pull a balanced look on wider fronts, supporting uniform hardware sizing in a kitchen or commercial millwork layout. Its brushed nickel finish provides a muted metal appearance that fits projects calling for this specific finish tone. The 3/4 inch width offers a defined gripping surface, giving hands a clear edge to pull against. A 1-1/8 inch projection sets the pull off the face enough for fingers to wrap behind it, which matters when users operate heavier drawers or larger doors.

Key Berenson Elevate Pull Details For Projects

• The 256 mm center to center dimension matches layouts that are already drilled or planned on that spacing, which keeps replacement or new installations aligned across multiple fronts.
• The 10-5/8 inch overall length lets the pull span more of the cabinet front, which can visually balance wider drawers or tall doors within a hardware plan.
• The brushed nickel finish defines the pullâ??s appearance as a brushed metallic look, which supports jobs where finish consistency across hinges and decorative hardware is important.
• The aluminum material makes up the pull body, which affects weight on the door or drawer and can be relevant where many pulls are installed across large banks of cabinets.
• The 3/4 inch width provides a measurable gripping edge, which can help users get a solid hold when opening doors and drawers during everyday use.
• The 1-1/8 inch projection creates clearance between the pull and cabinet face, which helps fingers fit behind the pull without contacting the door or drawer front.

Elevate Pull 256mm Center To Center Fit

The Elevate pull 256mm center to center design ties directly into drilling patterns that call for 10-1/16 inch hole spacing, which suits cabinet runs laid out on that specific metric size. That dimension supports both new construction layouts and hardware upgrades where existing holes are already set to 256 mm. With an overall length of 10-5/8 inch, the pull extends beyond the mounting points, which can help cover minor edge wear around the holes. The 3/4 inch width keeps the pull narrow enough for tight drawer groupings, so adjacent fronts can still operate without interference. A 1-1/8 inch projection defines how far the handle stands off the face, which impacts knuckle clearance when doors are opened at different angles.

Using This 2091-4BPN-P Pull In Cabinet Work

Where This Brushed Nickel Aluminum Pull Fits Best

This 2091-4BPN-P cabinet pull belongs to the Elevate collection, which identifies it as part of a coordinated hardware family for projects that standardize on that line. The 256 mm center to center spacing lines up with wider doors and drawers, making it suitable where longer pulls are specified along base cabinets or tall units. Its brushed nickel finish allows it to tie into other brushed nickel decorative hardware and moldings in the same space, supporting a unified appearance on face frames and slab fronts. The 10-5/8 inch length gives a sizable grip area across large drawer faces, which can benefit installations where users open deep storage drawers frequently. Because the material is aluminum, the pull adds modest weight to each front, which can be useful when many pulls are mounted across a bank of cabinetry.

Details That Support Repeatable Cabinet Installations

This brushed nickel aluminum cabinet pull uses the 10-1/16 inch center to center dimension, which helps installers repeat the same drilling pattern from cabinet to cabinet without recalculating hole locations. The 3/4 inch width creates a consistent reference when aligning pulls relative to door and drawer edges, aiding in precise layout work. A projection of 1-1/8 inch defines a fixed standoff, which can be applied repeatedly across a wall of cabinets for a uniform shadow line. The specific 8-32 x 1 inch screw size noted for this pull indicates the screw thread and length relationship to typical cabinet fronts, which matters when planning fastening into common door and drawer materials. Having these fixed measurements allows shop drawings and onsite templates to be based directly on the Elevate series dimensions, reducing layout variation between cabinets.

Common Questions About The Elevate Series Pull

Selecting This Pull For 256mm Cabinet Layouts

The Berenson Elevate brushed nickel pull ties directly to a 256 mm, 10-1/16 inch center to center pattern, making it suited to layouts built on that spacing. Its 10-5/8 inch overall length, 3/4 inch width, and 1-1/8 inch projection define how it will sit and feel on the cabinet front. The aluminum construction and brushed nickel finish identify both material and visual character, which matters when matching other decorative hardware and moldings. For projects standardizing on the Elevate collection dimensions and finish, this 2091-4BPN-P pull offers a defined set of measurements for consistent cabinet hardware planning.