Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Elevate brushed nickel pull gives cabinet doors and drawers a 5-1/16 inch center to center grip point, so hole spacing lines up cleanly on layouts built around 128 mm boring. The pull is part of the Elevate collection, which keeps a consistent look across multiple cabinet locations for unified jobs. Aluminum construction keeps the pull light while still providing a solid handhold, which helps when repeating the same pull across a full run of cabinets. A brushed nickel finish tones down reflections compared to bright metal, which helps finished fronts read cleanly under varied lighting. Overall length at 5-9/16 inch leaves a small reveal past the mounting holes, giving visual coverage around the boring pattern on typical cabinet fronts. Width at 3/4 inch gives enough surface area for fingers to grab, supporting everyday use on doors and drawers.
The 5-1/16 inch, or 128 mm, center to center drilling dimension defines the mounting pattern, which allows installers to match this Berenson aluminum cabinet pull to standard jigs set for 128 mm runs. Projection at 1-1/8 inch sets how far the pull stands off the cabinet face, giving consistent clearance when planning door swing near adjacent panels. With a 5-9/16 inch overall length, the pull suits many common drawer widths while leaving balanced margins at each end. The 3/4 inch width defines the front face, which helps in laying out hardware relative to stile widths and rail heights on framed or frameless doors. Using the specified dimensions keeps hole placement predictable from cabinet to cabinet, supporting repeatable drilling sequences on larger installations.
This brushed nickel cabinet handle from the Elevate collection is sized around a 128 mm center to center pattern, which aligns with many kitchen and bath cabinet runs built around metric hardware. The 5-9/16 inch overall length works well on medium-width doors and drawers, positioning the grip near the center while leaving space to the panel edges. Projection of 1-1/8 inch sets the pull out from the face, which can be helpful on thicker drawer fronts where extra finger room improves access. A 3/4 inch width presents a slim front edge, letting the handle sit comfortably on narrow stiles without crowding neighboring details. Being part of the Elevate collection, this 2087-4BPN-P pull supports coordinating layouts where the same profile runs across bases, uppers, and tall cabinets.
The 5-1/16 inch, or 128 mm, center to center spacing on this Berenson aluminum cabinet pull ties directly into standard drilling templates, which supports consistent hardware placement across long cabinet banks. Using the defined 5-9/16 inch length means each pull overhangs the mounting holes by a small, repeatable amount, which keeps visual alignment tight even when cabinets vary slightly in width. The 1-1/8 inch projection gives a consistent stand-off, which is useful when doors open near walls or appliances where clearance patterns matter. Width of 3/4 inch gives a uniform front profile, helping designers line up pulls with rail heights for clean sightlines. With aluminum material set under a brushed nickel finish, the pull maintains a steady look while keeping the run of hardware light on large installations.
The Berenson Elevate Series pull has a 5-1/16 inch, or 128 mm, center to center, which matches common cabinet drilling patterns for straightforward layout.
The 2087-4BPN-P pull has an overall length of 5-9/16 inch, a projection of 1-1/8 inch, and a width of 3/4 inch, guiding placement on doors and drawers.
The Berenson Elevate brushed nickel pull is made from aluminum, which keeps the handle light while still providing a solid gripping surface on cabinets.
The brushed nickel finish gives a muted metal look, reducing glare and helping the pull coordinate with many appliance and hinge finishes on projects.
This aluminum cabinet pull belongs to the Elevate collection, allowing the same style to be used across multiple cabinet areas for a unified look.
The manufacturer part number is 2087-4BPN-P, which identifies this specific Berenson Elevate Series 128 mm center to center brushed nickel pull.
The Berenson Elevate Series 5-1/16 inch center to center brushed nickel pull combines a 128 mm drilling pattern, 5-9/16 inch overall length, and 1-1/8 inch projection, giving cabinet projects a defined set of dimensions to design around. Aluminum construction with a brushed nickel finish supports a consistent look across multiple doors and drawers. When a job calls for a slim 3/4 inch wide pull in the Elevate collection profile, this 2087-4BPN-P part number provides a clear, repeatable choice for layout and specification.
Sold In: 1 Each
