Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Elevate matte black knob is a contemporary cabinet knob designed for projects that call for a clean, modern look. The knob comes from the Elevate collection, so it keeps styling consistent across doors and drawers in the same space. Its matte black finish controls reflections on face frames and doors, which helps the hardware visually recede while still giving a defined pull point for the hand. The knob body is made from aluminum, which keeps each piece light on the door while still providing a solid feel in normal cabinet use. A 1-9/16 inch length and 3/4 inch width create a broad contact surface, so fingers can comfortably grab the knob from different angles on typical cabinet fronts.
This Berenson aluminum cabinet knob uses an 8-32 screw size interface, which matches common cabinet door and drawer front drilling for decorative hardware. The 1-9/16 inch length lines up well when centered on standard door rails or drawer fronts, helping layouts stay consistent from piece to piece. A 1-1/8 inch projection defines how far the knob stands off the front, which affects how deep drawer boxes can be relative to neighboring faces in a run. With a 15/16 inch base diameter, the contact area around the fastener hole covers typical drilling cleanly, helping the trim ring sit flat against the finished surface.
This contemporary cabinet knob from the Elevate collection is suited to projects built around clean lines, because the rectangular 1-9/16 inch by 3/4 inch profile matches modern door and drawer fronts. The matte black finish works well where a darker hardware tone is desired, allowing the knobs to coordinate with other matte black cabinet hardware in the same room. Its aluminum material reduces weight on each door, which matters when multiple knobs are used across larger pantry cabinets or wide drawer banks. The 1-1/8 inch projection gives enough offset that the knob can be used on both doors and drawers without fingers dragging against the surface, which supports consistent hardware choice across the whole installation. With a 15/16 inch base diameter, the knob visually anchors well on standard-width rails and stiles, so single-knob drawer layouts still look proportionate.
The defined 1-9/16 inch length helps installers repeat centerline measurements across multiple fronts, which speeds layout when using a drilling jig or template. A 3/4 inch width keeps side-to-side bulk low, which is helpful when doors are closely spaced, because knobs remain clear of each other when doors swing. The 1-1/8 inch projection keeps the grip position predictable, so users feel the same clearance whether pulling a base cabinet door or a wall cabinet. The standard 8-32 screw size interface means the knob matches common drilling and thread expectations in cabinet shops, allowing it to integrate into existing hardware programs. The combination of length, width, projection, and base diameter defines a consistent visual rhythm on banks of doors and drawers, which is important on long runs where repeated hardware quickly sets the overall look.
The Berenson Elevate series cabinet knob has a 1-9/16 inch length, 3/4 inch width, 1-1/8 inch projection, and a 15/16 inch base diameter, giving it a compact, contemporary footprint on cabinet fronts.
The knob is made from aluminum, which keeps each piece light for handling and installation while still providing a solid pull point during normal cabinet use.
This contemporary cabinet knob is designed for an 8-32 screw size, aligning with common cabinet hardware drilling and thread standards in shop and jobsite work.
The Berenson Elevate matte black knob projects 1-1/8 inches from the cabinet surface, providing space for fingers between the knob and door or drawer face.
The knob is listed with a contemporary style and matte black finish, making it a good match for modern cabinet designs that favor simple, clean hardware lines.
The manufacturer part number for this Berenson Elevate series matte black knob is 2122-4055-P, which identifies the exact size, style, and finish.
The Berenson Elevate matte black knob combines a contemporary 1-9/16 inch by 3/4 inch profile with a 1-1/8 inch projection, giving cabinets a consistent modern pull point. With aluminum construction, matte black finish, and an 8-32 screw size interface, it integrates cleanly into standard cabinet hardware layouts while supporting a unified look across doors and drawers.
Sold In: 1 Each
