Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Elevate brushed nickel pull is an aluminum cabinet handle designed for projects that use a 6-5/16 inch center to center drilling, so it lines up with that specific hole spacing on doors and drawers. The pull has a brushed nickel finish that tones down reflection, which helps it blend with other brushed fixtures and hides fingerprints better than shinier surfaces in everyday use. Its aluminum construction keeps weight low, which is useful on large or multiple fronts where hardware weight adds up. The overall length of 6-13/16 inches gives good hand clearance across wider drawer fronts, which helps users grab near the ends without slipping off the edge. A projection of 1-1/8 inches stands the pull off the face of the cabinet enough for fingers to wrap comfortably. A width of 3/4 inch offers a stable grip surface, which feels solid when opening heavier drawers.
The Elevate series pull is specified with a 6-5/16 inch center to center measurement, so installers can drill or reuse holes on that exact spacing for a clean, straight fit. With a 6-13/16 inch total length, the pull overhangs the mounting points slightly, which helps cover minor chipping at the drill locations. The 1-1/8 inch projection sets the gripping bar away from the face just enough for typical adult fingers to wrap behind it without feeling cramped. At 3/4 inch wide, the pull seats solidly against the cabinet face, which helps it feel stable when fastened through the specified mounting holes. The brushed nickel finish is part of the pull itself, so it presents a consistent appearance from edge to edge once installed across a bank of doors or drawers.
This Berenson Elevate series pull, identified as 2089-4BPN-P, fits projects calling for a 160 mm center to center cabinet handle, which matches the 6-5/16 inch drilling dimension. The brushed nickel finish pairs naturally with brushed nickel hinges or faucets, so it supports a unified look across kitchen or bath cabinetry that uses that finish family. Because the pull length is 6-13/16 inches, it suits medium-width drawer fronts where a small knob might feel undersized, giving users a wider gripping span. The 1-1/8 inch projection makes the pull comfortable on both doors and drawers, since the bar stands off enough for a full fingertip grip. With a 3/4 inch width, it also feels substantial on taller pantry or closet doors that benefit from a more noticeable handhold.
The defined 6-5/16 inch center to center measurement means each Elevate pull can be laid out with consistent spacing across a full run, which keeps reveals and sightlines visually aligned from one cabinet to the next. The 6-13/16 inch overall length gives installers a clear reference when centering the pull on drawer fronts, since equal overhang from the mounting points helps position it accurately relative to the drawer edges. The 1-1/8 inch projection reduces the chance of fingers brushing the cabinet face while opening, which can help limit wear on painted or stained finishes over time. A 3/4 inch width creates a broad footprint against the front, which can help distribute stresses at the mounting holes when users pull hard on heavy drawers. The aluminum construction also keeps each pull lighter than many solid metal options, which can reduce cumulative strain on fasteners and moving parts when many pulls are installed on the same cabinet run.
The Elevate series pull uses a 6-5/16 inch (160 mm) center to center measurement, which sets the exact spacing between mounting holes for drilling and layout.
The Berenson 2089-4BPN-P pull has a 6-13/16 inch overall length, which provides some overhang beyond the mounting points for better hand placement.
The Elevate brushed nickel pull projects 1-1/8 inches from the cabinet face, giving enough clearance for fingers to grip comfortably behind the handle.
The Elevate series brushed nickel pull is made from aluminum, which keeps the handle light while still providing a solid feel on doors and drawers.
The Berenson Elevate brushed nickel cabinet pull is 3/4 inch wide, giving a broad grip area that feels secure when opening heavier drawers.
The 2089-4BPN-P cabinet pull is specified with a brushed nickel finish, which offers a muted sheen that coordinates with other brushed nickel components.
Choose this Berenson Elevate series 6-5/16 inch center to center brushed nickel pull when a 160 mm drilling pattern is required and a 6-13/16 inch overall handle length fits the cabinet design. Its aluminum construction, 1-1/8 inch projection, and 3/4 inch width provide a practical balance of grip comfort and visual scale on both doors and drawers. The brushed nickel finish supports a consistent look wherever similar finishes appear in the project. For runs of cabinets using this spacing, standardizing on the 2089-4BPN-P pull helps maintain uniform sightlines and hand feel from one opening to the next.
Sold In: 1 Each
