Berenson Elevate Series 10-1/16" (256 mm) Center to Center Satin Gold Pull, - 2105-40SG-P

Elevate Pull 256mm Satin Gold For Cabinets

Elevate pull 256mm satin gold identifies this Berenson Elevate Series cabinet pull as a 10-1/16 inch (256 mm) center to center handle, which helps match existing drilling patterns on doors and drawers. The aluminum construction provides a lightweight pull that is straightforward to handle during layout and mounting. Its satin gold finish delivers a contemporary look that aligns with modern cabinet and furniture styles. The pull length of 10-5/8 inches gives generous hand clearance across wider drawer fronts, aiding everyday use in kitchens, baths, or shop cabinets. A projection of 1-1/8 inches sets the pull away from the face, giving fingers room behind the handle while operating doors or drawers. The 3/4 inch width and 9/16 inch base diameter create a balanced footprint on the surface, which helps the pull sit visually straight and consistent across multiple fronts.

Key Elevate Pull Details That Support Use

• The 10-1/16 inch (256 mm) center to center measurement aligns with standard drilling for wide cabinet doors and drawers, which streamlines layout when lining up handles across a bank of fronts.
• The 10-5/8 inch overall length spans more of the drawer or door face, giving a larger gripping area that helps when opening wider, heavier fronts.
• The 1-1/8 inch projection sets the pull out from the surface, providing finger clearance that assists users wearing gloves or working in tight cabinet runs.
• The 3/4 inch width offers a comfortable surface to grab, which supports repeat use in busy kitchens, shops, or commercial work areas.
• The 9/16 inch base diameter defines a compact mounting footprint, which helps the pull sit neatly on narrower rails or stile faces.
• The satin gold finish delivers a contemporary appearance, helping match modern decorative hardware schemes using warm metallic tones.
• The aluminum material keeps the pull light, which is helpful when installing multiple pulls across large cabinet installations.

Mounting Dimensions And Fit For Installation

This Berenson Elevate Series pull uses a 10-1/16 inch (256 mm) center to center spacing, so hole locations line up along a consistent horizontal or vertical run on cabinet doors and drawers. The 10-5/8 inch overall length means the handle extends slightly beyond the mounting holes at each end, which aids visual alignment relative to door and drawer edges. With a projection of 1-1/8 inches, the handle stands off the surface enough to grip from below or above, supporting varied reach angles across upper and base cabinets. A 3/4 inch width and 9/16 inch base diameter define the contact area against the cabinet face, which assists in planning hole placement to avoid edge detailing or narrow rails.

How This Berenson Pull Works In Projects

Using The Elevate Pull On Cabinets And Drawers

This Berenson Elevate Series pull is identified for contemporary style applications, so it works well on modern cabinet fronts where straight lines and minimal detailing are preferred. The satin gold finish coordinates with other warm metal elements, allowing consistent visual runs across doors and drawers. Its 10-1/16 inch (256 mm) center to center dimension suits wider cabinet doors and large drawer fronts, helping create a proportional look on base cabinets, pantry doors, or storage banks. The 10-5/8 inch length spreads the grip area, which helps when opening deeper drawers loaded with tools, cookware, or supplies. Aluminum construction keeps each pull relatively light, which is useful when repeating the same pull across long cabinet walls or large commercial millwork projects.

Details That Support Consistent Layout And Operation

The defined 10-1/16 inch (256 mm) center to center spacing allows installers to use templates or jigs for drilling, supporting accurate repetition across multiple fronts. The 1-1/8 inch projection secures a working gap between the pull and cabinet face, which helps fingers wrap behind the handle without scraping along the door surface. At 3/4 inch width, the pull offers a stable gripping surface, assisting users who regularly open and close cabinets throughout the day. The 9/16 inch base diameter concentrates the contact area, which can help position the pull cleanly on narrow rails while still covering the drilled holes. The satin gold finish on aluminum provides a uniform color presentation across a project run, which benefits designers and installers aiming for consistent visual alignment from one cabinet section to the next.

Common Questions About This Elevate Satin Gold Pull

Selecting This Pull For Your Next Cabinet Run

This Elevate pull 256mm satin gold from Berenson Corporation pairs a 10-1/16 inch (256 mm) center to center layout with a contemporary satin gold aluminum design, supporting consistent drilling and a modern look. Its 10-5/8 inch length, 1-1/8 inch projection, 3/4 inch width, and 9/16 inch base diameter define how it will sit and operate on cabinet doors and drawers. For projects requiring repeated wide pulls across kitchens, baths, or commercial millwork, these defined dimensions and finish details help plan layout lines and visual rhythm before committing to installation.