Berenson Elevate Series 12-5/8" (320 mm) Center to Center Graphite Pull, - 2113-4GPH-P

Berenson Elevate Series Pull For Cabinet Projects

Berenson Elevate Series pull gives you a contemporary aluminum handle in a graphite finish, so cabinets and appliances get a modern, uniform look on the job. The 12-5/8 inch center to center dimension sets consistent spacing for drilling and layout across doors and drawer fronts. Overall length of 13-1/8 inch provides extra hand clearance along wider fronts, which helps on larger appliance-style doors. Projection of 1-1/8 inch keeps the hand away from the surface, reducing finger contact with finished panels. The 3/4 inch width presents a noticeable grip area that feels substantial without overpowering the front. A base diameter of 9/16 inch gives each mounting point a defined footprint, which visually anchors the pull on stile and rail constructions. Aluminum material keeps weight down, which is useful when this pull is repeated across a full kitchen or bank of cabinets.

Key Pull Details That Support Cabinet Work

• The 12-5/8 inch center to center layout aligns with common appliance and large drawer applications, so installers can repeat the same drilling pattern across multiple fronts for faster production work.
• The 13-1/8 inch length extends slightly beyond the mounting centers, creating a balanced proportion on tall doors and wide drawers that helps finished runs look straight and intentional.
• The 1-1/8 inch projection sets the pull off the face just enough to clear fingers during use, which helps protect painted and laminated surfaces from frequent contact.
• The 3/4 inch width and 9/16 inch base diameter give each end a defined bearing area against the cabinet face, contributing to a solid visual presence on both narrow and wide frames.
• The graphite finish on aluminum delivers a dark, contemporary look that coordinates with modern decorative hardware and moldings in the same color family.
• The 8-32 thread screw size specification works with standard tapped mounting holes in many cabinet and furniture applications, simplifying hardware selection for installers.

Mounting Layout And Fit For This Pull

The 320 mm center to center dimension on this pull defines exactly where to drill, which keeps hole spacing consistent across a run of bases and uppers. With an overall length of 13-1/8 inch, the ends of the pull sit slightly past the mounting points, helping align visually with door edges and drawer proportions. The 1-1/8 inch projection provides adequate hand clearance while staying close enough to the face for a tight, modern profile. A 3/4 inch width gives room for a full finger grip, which is useful on heavier fronts where a solid grasp is important. The 9/16 inch base diameter at each mounting point sets a clear boundary for touch-up and layout marks during installation, helping finished hardware lines stay straight and repeatable.

Using This Graphite Pull In Real Projects

Where This Elevate Appliance Pull Works Best

This Berenson Elevate Series pull is categorized under decorative hardware and moldings in handles and pulls, so it fits typical cabinet and furniture door and drawer applications. The 12-5/8 inch center to center dimension and 13-1/8 inch length make it suitable for larger cabinet fronts where a longer pull visually matches the scale. As an appliance pull style with 320 mm center spacing, it aligns with layouts that carry the same hardware look from cabinets onto panel-ready appliances. The contemporary style pairs with flat-panel and clean-lined door designs, giving a consistent modern aesthetic across a project. The graphite finish provides a dark tone that contrasts well against lighter fronts and coordinates with other graphite decorative components.

Details That Support Consistent, Repeatable Results

The defined 320 mm center to center specification allows installers to rely on jigs or templates set to that spacing, which streamlines drilling and reduces layout variation. With the 1-1/8 inch projection, doors can swing and drawers can open while keeping the pull close to the surface, supporting a sleek profile that still offers functional clearance. The 3/4 inch width and 9/16 inch base diameter give predictable contact areas on the face, helping align the pull parallel to edges for clean sightlines. Aluminum construction keeps the pull light, which is especially useful when hardware is installed on thinner door materials or lighter cabinet constructions. The 8-32 screw size specification matches a common fastener thread in cabinet hardware, allowing installers to match thread type across multiple pull locations on the same project.

Common Questions About This Elevate Graphite Pull

Select This Pull For Graphite Cabinet Runs

The Berenson Elevate Series pull in graphite combines a 12-5/8 inch center to center dimension, 13-1/8 inch length, and 1-1/8 inch projection, so it fits larger cabinet and appliance-style fronts with consistent spacing. Aluminum construction keeps weight low while the contemporary style and graphite finish coordinate with modern decorative hardware and moldings. With defined width, base diameter, and 8-32 x 1 inch screw size, this pull provides clear installation parameters for repeatable cabinet and furniture projects.