Berenson Elevate Series 5-1/16" (128 mm) Center to Center Graphite Pull, - 2110-4GPH-P

Berenson Elevate Graphite Pull For Cabinets

Berenson Elevate graphite pull gives a contemporary cabinet installation a clean, consistent look using a defined aluminum handle. The pull is part of the Elevate collection, so multiple cabinets on the same job can share the same style across doors and drawers. The 5-1/16 inch (128 mm) center to center drilling aligns with common cabinet boring patterns, which supports straightforward layout on new work or straightforward replacement of pulls with the same hole spacing. The aluminum material keeps the pull lightweight while maintaining a solid hand feel during repeated use. A graphite finish presents a dark, modern appearance that coordinates with many contemporary fronts. The pull projects 1-1/8 inch from the surface, providing finger clearance for a comfortable grip when opening or closing. Overall, this handle balances contemporary style, practical sizing, and a familiar installation pattern.

Key Details That Support Cabinet Work

• The 5-1/16 inch center to center measurement sets the drilling distance between mounting points, so boring can follow a predictable 128 mm layout on cabinet doors and drawers.
• The 5-9/16 inch overall length defines the visible span of the pull across the face, helping align it visually with door widths and drawer fronts during layout.
• The 1-1/8 inch projection establishes how far the pull stands off the surface, creating consistent hand clearance for gripping without crowding adjacent fronts.
• The 3/4 inch width shapes the front profile of the pull, which affects both the visual proportion on the cabinet face and the contact area for fingers.
• The 9/16 inch base diameter describes the footprint at each mounting point, which helps assess how the pull will cover existing screw holes of similar size.
• The graphite finish on the aluminum pull provides a dark contemporary appearance that can visually coordinate with modern cabinet colors and surfaces.

Mounting And Fit Details For This Pull

This Elevate Series pull uses a 5-1/16 inch (128 mm) center to center layout, so hole locations on the cabinet face are defined by that fixed drilling distance. The pull length of 5-9/16 inch gives a slight overhang beyond the mounting points, which helps center it visually on wider doors and drawers. A projection of 1-1/8 inch creates a usable gap between the cabinet surface and the backside of the pull, allowing fingers to wrap behind the handle during operation. The 3/4 inch width and 9/16 inch base diameter concentrate the pull profile into a streamlined shape, which can be useful where multiple handles are aligned closely on banks of drawers. Together, these dimensions guide drilling, alignment, and visual spacing on the finished installation.

How This Berenson Pull Works In Practice

Using The Elevate Pull On Cabinets

The Berenson Elevate Series 5-1/16 inch center to center pull is designed for cabinet doors and drawers where a contemporary style is desired. Its aluminum construction gives the pull a defined shape while keeping weight low on the front of the cabinet. The graphite finish provides a dark, uniform tone that pairs well with many modern laminates, painted doors, and wood grains. With an overall length of 5-9/16 inch, the pull spans a practical portion of small to medium door and drawer fronts, helping operators get a solid grip anywhere along the handle. The 1-1/8 inch projection works with the 3/4 inch width to form a comfortable handhold, allowing fingers to pull from above, below, or the side as needed during everyday use. On multi-cabinet runs, the consistent Elevate collection styling supports a coordinated appearance.

Why The Specific Dimensions Support Repeatable Results

The 128 mm (5-1/16 inch) center to center drilling on this pull standardizes hole spacing, which helps installers repeat the same layout across multiple fronts with minimal measuring variation. That fixed spacing also simplifies replacing existing pulls that share the same 128 mm pattern, because the pull can align to the established holes. The 9/16 inch base diameter at each mounting point provides a defined contact area against the cabinet face, helping the pull sit flush when fastened. A 5-9/16 inch overall length keeps the handle proportionate, so multiple pulls can be aligned on drawer stacks without appearing oversized. The 1-1/8 inch projection sets a repeatable clearance dimension, allowing banks of cabinets to maintain uniform stand-off from the fronts. Combined, these measurements allow installers to plan drilling jigs and layout marks for consistent, repeatable results.

Common Questions About This Elevate Pull

Select This Graphite Pull For Matching Jobs

The Berenson Elevate Series 5-1/16 inch center to center graphite pull combines a contemporary style, aluminum construction, and a standardized 128 mm drilling pattern that fits many cabinet layouts. Its 5-9/16 inch overall length and 1-1/8 inch projection provide a practical balance of reach and clearance on doors and drawers. The graphite finish supports a modern visual tone across residential or commercial cabinet runs. For projects calling for coordinated hardware with defined measurements, this Elevate pull offers a clear, repeatable set of dimensions to build into the layout plan.